Hi all, I just picked up a X10SLH-LN6T and installed an E3-1270v3 in there. After much trial and tribulation, I finally got the thing booting up properly however I'm running into an issue that it seems like others have had, but I haven't found any obvious answer to. The problems are two-fold:
1) I can't get PCI passthrough to work, as the error I'm getting is that the CPU doesn't support the functionality, even though VT-d is enabled in the BIOS.
2) The CPU is being limited to 1 core/2 threads, and not the 4 cores/8 threads that should be enabled.
I'm guessing both of these things are related, and it's probably due to a jumper but I can't for the life of me figure out what needs to be done to rectify this. Can anyone help a lost soul out?
Thanks in advance.
1) I can't get PCI passthrough to work, as the error I'm getting is that the CPU doesn't support the functionality, even though VT-d is enabled in the BIOS.
2) The CPU is being limited to 1 core/2 threads, and not the 4 cores/8 threads that should be enabled.
I'm guessing both of these things are related, and it's probably due to a jumper but I can't for the life of me figure out what needs to be done to rectify this. Can anyone help a lost soul out?
Thanks in advance.