Supermicro H11DSi-NT and AMD EPYC 7302 don't see 1 memory stick Micron 32 GB in Slot A1 for CPU1
- Thread starter aeugene1977
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
To me that pin from earlier looks present but bent.
All other pinheads in the region had that golden shine this one did not
looks to be twisted and rotated out of line.
The twist will also cause contact issues if you just align it again.
Doable, SP3 pins are pretty durable, at least way more then intel lga1151.
All other pinheads in the region had that golden shine this one did not
looks to be twisted and rotated out of line.
The twist will also cause contact issues if you just align it again.
Doable, SP3 pins are pretty durable, at least way more then intel lga1151.
Yes, something is wrong with this pin, it will be necessary to remove the processor and examine it properly. Thanks for the hint! There don't seem to be any other options except for this place.
UPD: Yes, that's right, it's him - I rang him with a multimeter with the right contact in the memory slot - the circuit is not broken. It's just that for some reason the upper end of the contact is broken off, and it turns out to be lower than the others, it does not reach the land on the processor. How can it be repaired, soldered something on top of the contact?
Attachments
Last edited:
The problem was solved - the specialist removed the broken pin and soldered a backup one from the same socket in its place, now all the memory is fully visible!