Need advice on how-to Flash LSI SAS 9210-8i HBA Controller

Discussion in 'RAID Controllers and Host Bus Adapters' started by Hjalti Atlason, Jan 17, 2017.

  1. Hjalti Atlason

    Joined:
    Jul 2, 2016
    Messages:
    62
    Likes Received:
    13
    Hi guys

    I was wondering if you could recommend a good guide on how-to flash a LSI SAS 9210-8i HBA Controller.
    I´m going to use it for a Freenas Fileserver (ZFS) and need to flash it to IT mode.

    Advice would be much appreciated.

    LSI9210-8i.jpg
     
    #1
  2. Hjalti Atlason

    Joined:
    Jul 2, 2016
    Messages:
    62
    Likes Received:
    13
    Update:I´ve Put the DOS utilities on a Bootable DOS USB or CD

    link to the Firmware for the LSI 9210-8I HBA controller
     
    #2
Similar Threads: Need advice
Forum Title Date
RAID Controllers and Host Bus Adapters Need advice for LSI's U.2 Enabler ( 05-50061-00 ) Aug 4, 2019
RAID Controllers and Host Bus Adapters need advice for hba/expander Jul 9, 2019
RAID Controllers and Host Bus Adapters Need some advice on which HBA to buy May 13, 2019
RAID Controllers and Host Bus Adapters Need advice to choose cable for Perc H330 Oct 27, 2018
RAID Controllers and Host Bus Adapters Needs some advice on MegaRaid 9271-8i Oct 9, 2015

Share This Page