MZ32-AR0 REV 1 > 3
- Thread starter deathvenom369
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
personaly i don't have done that.
you need to update the BMC FW to latest first, then update the BIOS with the BMC-WebGUI(at power off state)
the file you need is Milan.RBU (16mb) RBU = Remote BIOS Update)
the standard BIOS package includes only the image.RBU file (Rome 16mb + Milan 16mb=32mb)
Note this may not work with old used 1.0 boards. confirmed only with new Retail ones.
here is the package M13c
new one M18_R34 with Milan.RBU
you need to update the BMC FW to latest first, then update the BIOS with the BMC-WebGUI(at power off state)
the file you need is Milan.RBU (16mb) RBU = Remote BIOS Update)
the standard BIOS package includes only the image.RBU file (Rome 16mb + Milan 16mb=32mb)
Note this may not work with old used 1.0 boards. confirmed only with new Retail ones.
here is the package M13c
new one M18_R34 with Milan.RBU
Last edited:
if you ask Gigabyte they will tell you how and give you that Milan.RBU.
i just figured out how to make Milan.RBU from latest BIOS update.
you can flash the old back if something not works.
or make a dump with USB programmer and clamp
or make a dump with USB programmer and clamp
Where can I get the latest BMC don't see it on MZ32-AR0 (rev. 3.0) | Server Motherboard - GIGABYTE Global
as usual at gigabyte FW downloads.
Last edited:
Cheers just done it but IPMI password has changed. Do you know what the default password is for these boards? admin/password admin/admin not working
Did you get this working? Also the Rev 3.0 has the U.2 ports listed as pcie Gen 4 vs the Gen 3 listed for the Rev 1.0. Is this "unlocked" by the new firmware?
it is a thing of BIOS and CPU. Rev 1-3 difference is the EPYC gen out of the BOX support (Factory Firmware)
this worked on some boards (depends on the initial BIOS)
if not use the linked package above and the Milan.RBU inside (flash with BMCWebGUI, host off)
do only if you want to run Milan.
Not sure what you mean by the initial BIOS?
If I have the latest v1.0 BIOS from the site do you think that should that let me flash to the latest 3.0 version?
some boards allow this some not.
if you have a MIlan CPU you can try the image.RBU with BMCWebGUI.
edit: gigabyte prvoded a Milan.RBU which is not included in std. packages. this flashes only Milan support,
do only if you have MIlan.
before you start:
where is your MZ32-AR0 from ?
old used one 1.0 form china may not work for this, they are out of old OEM/GB servers.