Hello, I'm attempting to scrape CPU temps, NVME temps, and fan speeds from the Minisforum MS-01 using Debian CLI which I can forward to some monitoring tool. One of my two hosts has an elevated fan speed for reasons I have not determined yet. Currently the latest install of Proxmox is installed on both systems (ver 8.1.10). Both hosts are identical hardware and software configuration. Hardware is Intel® Core™ i9-13900H. My ultimate goal is to possibly adjust the BIOS fan thresholds so the fans kick on at a more reasonable point, if this makes sense given the workload. First I need to be able to monitor it though. Additional detail: there is no load on either system, just the base install of Proxmox VE, which is why I find it odd that one system fan has spooled up.
I attempted to install package "lm-sensors". When I run the command "sensors" I get the following output which seems incomplete or partial:
Is lm-sensors the best tool for this approach? I notice when I install/run "btop" it's correctly monitoring the CPU temperatures. If lm-sensors is the right tool, what is the best approach for updating the configuration file
Any thoughts or help appreciated, thanks!
I attempted to install package "lm-sensors". When I run the command "sensors" I get the following output which seems incomplete or partial:
Code:
root@pve3:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +24.0°C (high = +100.0°C, crit = +100.0°C)
Core 4: +28.0°C (high = +100.0°C, crit = +100.0°C)
Core 8: +29.0°C (high = +100.0°C, crit = +100.0°C)
Core 12: +33.0°C (high = +100.0°C, crit = +100.0°C)
Core 16: +27.0°C (high = +100.0°C, crit = +100.0°C)
Core 20: +26.0°C (high = +100.0°C, crit = +100.0°C)
Core 24: +36.0°C (high = +100.0°C, crit = +100.0°C)
Core 25: +36.0°C (high = +100.0°C, crit = +100.0°C)
Core 26: +36.0°C (high = +100.0°C, crit = +100.0°C)
Core 27: +36.0°C (high = +100.0°C, crit = +100.0°C)
Core 28: +34.0°C (high = +100.0°C, crit = +100.0°C)
Core 29: +34.0°C (high = +100.0°C, crit = +100.0°C)
Core 30: +34.0°C (high = +100.0°C, crit = +100.0°C)
Core 31: +34.0°C (high = +100.0°C, crit = +100.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8°C (crit = +105.0°C)
nvme-pci-0100
Adapter: PCI adapter
Composite: +31.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +31.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C)
/etc/sensors3.conf
to work with the MS-01?Any thoughts or help appreciated, thanks!