Minisforum MS-01 PCIe Card and RAM Compatibility Thread
- Thread starter Patrick
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
It's running on my old unraid server: Docker
And when the 2 servers are offline i use it on my mac (MeshCentral)
With meshcommander i can't connect.
it looks like grafana; perhaps with prometheus and node exporter.
Yes, it's Grafana. I'm exporting data from PVE using Telegraf to InfluxDB.
Correct the only work around is to disable amt
Can not get DHCP leases on new intel I225-LM based machine
Hello all, I am new to pfsense and I am tearing my hair out trying to debug an issue on a new machine / new install. I can't get any clients to get a DHCP l...
DHCP on pfSense VM not handing out addresses past the host
I have built a pfsense server as a VM on one of my ProxMox hosts. I have two hosts and plan to have HA pfsense on the second host. Most everything appears to be working like the NIC passthrough for WAN and the bridge for local traffic. Physical computers outside the ProxMox environment connect...
forum.proxmox.com
Not the fastest GPU but ETA prime just tested this.
Just ordered a MS-01, now I get to play the waiting game. I know a few people mentioned 3D printing rack mounts for it, but has anyone heard of Winther3D? They use injection molding for at least the front panel, and it looks a lot nicer than having a 3D printed front.
I emailed them about making a custom mount for the MS-01, but they said they'd need one in hand in order to make sure about fitment. I would but they're located in Spain and I'm in the States.
Anyone else willing to take the bullet?
I emailed them about making a custom mount for the MS-01, but they said they'd need one in hand in order to make sure about fitment. I would but they're located in Spain and I'm in the States.
Anyone else willing to take the bullet?
I wonder... if in esxi when i passthrough the 12900h iGpu to a windows VM i get the error 43.. if i but this one, and everywhere where i search they all say that the Intel driver is the problem, if i buy this one, i wont have the same error 43? after all the driver will be the same right?
I allready bought a Radeon 6400 and i get error 43 also in there.. and so far the only GPU i can successfully passthrough to windows is an NVIDIA 730 but the heatsink is big so i have the machine without the case....
What do you think?
Mmm... please try as suggested above by Chris. I hope it's not like mine (faulty CPU).
If it happens again I'll try disabling HT first, I believe the performance hit will be lower than disabling E-Cores on the 13900H. If it doesn't help, then I'll try disabling E-Cores. Thanks for the tip
Were you able to RMA it? How did you test yours to conclude it was a faulty CPU?
I was within the window to ship it back to Amazon.
I sent error log file to Minisforum support in their Discord channel and they told me it was a faulty CPU.
Can anyone see any flaws with just adding a sata pcie card to this and running some sata cables out of the case? I have considered DAS via sff8088 or Thunderbolt however the sff card will kick out a lot of heat in the small case and increase power usage vs a sata card, TB would be a nice solution but looking at something like OWC Flex 1U4 or OWC ThunderBay 4 it'll likely be £550+ vs <£100 via a sata card and pico psu for the hdds.
Basically looking to add 4x 18TB drives and keeping power usage as low as reasonable, don't mind spending a bit but not sure it's worth £500ish for a pretty enclosure.
Wonder if there's anything I've missed or if anyone's done similar?
Basically looking to add 4x 18TB drives and keeping power usage as low as reasonable, don't mind spending a bit but not sure it's worth £500ish for a pretty enclosure.
Wonder if there's anything I've missed or if anyone's done similar?
Yep I was thinking of using a pico psu and splitting off some sata connectors for this, thanks.
I will consider that thanks, no problem adding some cooling but I don't think there is much advantage adding the HBA apart from a neater solution, I think I'd prefer the power/cost saving though. I do have a Netstor NS370S I could use but that uses 20w without drives and has noisier fans than I'd like running in my home office.
Anyone else seeing their memory halved when using a PCIe 3.0 x8 card? I've got 96GB that gets cut to 48GB when I put in my LSI 9300-8E HBA. I also have 2 nvme SSDs installed in the 1st and 2nd slots that may be affecting how many PCIe lanes are available.
Update: Definitely not related to having the 2 M.2 SSDs - I removed them and still have half the memory gone. Removing the PCIe card resolves the problem. Wondering if I need to tape some of the PCIe contacts to reduce it to PCIe 3.0 x4.
Update: Definitely not related to having the 2 M.2 SSDs - I removed them and still have half the memory gone. Removing the PCIe card resolves the problem. Wondering if I need to tape some of the PCIe contacts to reduce it to PCIe 3.0 x4.
Last edited: