Minisforum ms-01 i9-13900H 96GB with Proxmox
- Thread starter homelabenthusiast
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Responding to my own post, I spoke one day too soon. Had my first crash after upgrading to 1.24 BIOS. Had around 20 days of uptime but alas, even with the 1.24, these systems are not stable or reliable.
I'll probably need to go another direction at this point. The MS01 experiment will conclude as a failure, and an expensive one at that.
A week ago I put an MS01 into operation with Kingston KVR56S46BD8K2-96. I haven't had a single crash so far. Maybe switching from Crucial to Kingston will help.
Get back to me with 60 or 90 days of uptime and I might consider replacing the 10 Crucial SO-DIMMS with Kingston.
I have this one as well, I have had 1 crash total but that was already around 7 days of uptime and has been a while ago. I am at 20 days uptime right now. I am also on the stock BIOS and not on 1.24.
Hello everyone,
I have a new MS01 device and since several days I have crashes in Proxmox.
I am currently using 2x48 DDR5 Ram from Cruzial.
Could I please also get the latest bios.
Is it sure that the Kingston memory will help?
@JaxJiang Can you send me the beta test Bios 1.24.
1 Step i buy the Kingston Ram.
2. Step i update the Bios.
3. Test the System
Do I only have to update the bios?
Best regards
Joe
I have a new MS01 device and since several days I have crashes in Proxmox.
I am currently using 2x48 DDR5 Ram from Cruzial.
Could I please also get the latest bios.
Is it sure that the Kingston memory will help?
@JaxJiang Can you send me the beta test Bios 1.24.
1 Step i buy the Kingston Ram.
2. Step i update the Bios.
3. Test the System
Do I only have to update the bios?
Best regards
Joe
Hey @JaxJiang, I would also like to try the BIOS 1.24. I have the MS-01 i5-12600H with 2 x 48 GB Crucial - DDR5 5600 MHz / PC5-44800 (CT48G56C46S5) and Proxmox running. My system crashes every few days (at least once a week) and then doesn't respond to anything until I switch it off. The fans are running at full load. I really hope the BIOS update helps, otherwise I'll have to look for another workstation.
1. what kind of workload on your ms-01, system, running software.
On my system is Debian Proxmox.
I have 3 VM.
The first VM is a Unfi controller with 2 GB Ram 1 CPU.
Second VM is a Debian DHCP server 2 GB Ram 1 CPU
The third is my CISCO FMC for my firewall with 4 CPU and 32 GB Ram
2. which port do you use. NVME/PCIE. 10G/2.5G
I currently only have 2.5G in the future I will upgrade to 10G
Unfortunately I only have 1G uplinks on my switch.
I have 2 NVME Samsung PRO 2 TB NVME in Raid 1 for Proxmox.
3. which usage environment?
Could you provide more information?
What information do you need? ?
I can give you what you need for some tests.
The utilization is not very high at the moment it is very fluctuating.
The CPU is only slightly utilized, I suspect that the interaction between the CPU and the RAM is not working properly and since it is an INTEL CPU probably the INTEL error is present.
Intel responds to stability problems: Warranty for 13th and 14th generation CPUs extended by two years | igor´sLAB
Intel recently announced that it is extending the warranty on its 13th and 14th generation processors, also known as “Raptor Lake”, by two years. This decision follows persistent reports of stability…
www.igorslab.de
I get my Kingston Ram yesterday but im wait for the next Crash with cruicial Ram.
Thx for help.
On my system is Debian Proxmox.
I have 3 VM.
The first VM is a Unfi controller with 2 GB Ram 1 CPU.
Second VM is a Debian DHCP server 2 GB Ram 1 CPU
The third is my CISCO FMC for my firewall with 4 CPU and 32 GB Ram
2. which port do you use. NVME/PCIE. 10G/2.5G
I currently only have 2.5G in the future I will upgrade to 10G
Unfortunately I only have 1G uplinks on my switch.
I have 2 NVME Samsung PRO 2 TB NVME in Raid 1 for Proxmox.
3. which usage environment?
Could you provide more information?
What information do you need? ?
I can give you what you need for some tests.
The utilization is not very high at the moment it is very fluctuating.
The CPU is only slightly utilized, I suspect that the interaction between the CPU and the RAM is not working properly and since it is an INTEL CPU probably the INTEL error is present.
Intel responds to stability problems: Warranty for 13th and 14th generation CPUs extended by two years | igor´sLAB
Intel recently announced that it is extending the warranty on its 13th and 14th generation processors, also known as “Raptor Lake”, by two years. This decision follows persistent reports of stability…
I get my Kingston Ram yesterday but im wait for the next Crash with cruicial Ram.
Thx for help.
I update now to 1.25 to test all. Since i install 1.24 with ram Freq 4400 i had no issue. I test now the Bios 1.25.
At the moment I still have the Crucial Ram installed with the Freq 4400 and I have no crashes or freezing.
If there are problems, I would test the Kingston Ram and report back.
At the moment I still have the Crucial Ram installed with the Freq 4400 and I have no crashes or freezing.
If there are problems, I would test the Kingston Ram and report back.
It's running 24/7 12+ VMs on Proxmox (3 node cluster) including kubernetes node. Right now used about 80GB memory on MS-01.
Hello,
My 2 MS-01s 13900H / 48Gb Crucial DDR5 are still rebooting in an untimely manner, and i haven't be contacted by @JaxJiang for the beta BIOS, could someone be kind enough to DM/link me the 1.24+ BIOS to see if it fixes this ?
Thanks
not kingston but I have one unit with Mushkin Redline 96GB and it has been completely stable. the one with Crucial 96GB has been problematic
Is it the DDR5-4800 or the DDR5-5600 kit you use? How long has your ms-01 been running stable with this RAM?