M.2 Drive DIY Mount Ideas

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

gregoinc

New Member
Apr 27, 2023
16
3
3
Recently purchased a used Supermicro H11SSL-i motherboard. Only issue... it didn't come with the nylon mounting clips to retain the M.2 drive in place.

Unfortunately Supermicro doesn't sell spare parts to us folks in the great land down under, so I am looking for some suggestions on possible DIY solutions for mounting the M.2 drive. I wish Supermicro used screw in drive mounts... but anyway, I digress.

Any suggestions on solving this issue much appreciated.

20230428_113236.jpg
 

RolloZ170

Well-Known Member
Apr 24, 2016
5,438
1,644
113
i have a spare MCP-450-00006-0B but shiping is very slow or very expensive to the great land down under.
 

RolloZ170

Well-Known Member
Apr 24, 2016
5,438
1,644
113
M.2 Anchor
anchorM.2.jpg
the adv. of the Anchors is you don't need to remove the motherboard if you want to replace a 80mm SSD with a 110mm one i.e.

 
Last edited:

gb00s

Well-Known Member
Jul 25, 2018
1,198
603
113
Poland
I have seen people take a pan-head screws and rubber/paper washers and mounted the nvme with it (that's a 1$ bill from the local tools shop). As @RolloZ170 mention already, motherboard standoffs also work.

EDIT: @Rand__ >> @RolloZ170
 
Last edited:
  • Like
Reactions: itronin