EU Huawei RH2288H V3 (ddr4/v4) full fronts 187€

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
X

Xeroxxx

Member
Mar 12, 2020
87
53
18
Check previous pages or use search, link to thread with firmware download has been posted several times now.
 
nihonjin

nihonjin

Lost in translation
Mar 31, 2021
270
156
43
Xeroxxx said:
Check previous pages or use search, link to thread with firmware download has been posted several times now.
Click to expand...
Yeah, but without huawei promoted account isn't possible to download

You should have figured out beforehand why I did ask about it.
 
X

Xeroxxx

Member
Mar 12, 2020
87
53
18
You should use search function before making accusations. Public links/sources have been posted without the need of huawei account.

If its down, ask in the specific thread for reupload.
 
G

grenskul

Member
Nov 8, 2020
74
41
18
Has anyone managed to run the fans under 20% ? I got a tip from a former huawei rep that that minimun limit is changeable using u-boot commands but I'm not really the right guy to go look that low level.
 
Last edited:
O

odabajo

New Member
Oct 8, 2022
5
3
3
grenskul said:
Has anyone managed to run the fans under 20% ? I got a tip from a former huawei rep that that minimun limit is changeable using u-boot commands but I'm not really the right guy to go look that low level.
Click to expand...
I’m also interested on this, if anyone got any insight
 
A

AsTuRkInG

New Member
Nov 9, 2022
4
0
1
odabajo said:
I’m also interested on this, if anyone got any insight
Click to expand...
As far as I have been able to ascertain for myself, they cannot be set below 20%.

to set the manual mode
ipmcset -d fanmode -v 1 0

to set the level to 20%, if you put less it tells you that it can't be set
ipmcset -d fanlevel -v 20
 
G

grenskul

Member
Nov 8, 2020
74
41
18
AsTuRkInG said:
As far as I have been able to ascertain for myself, they cannot be set below 20%.

to set the manual mode
ipmcset -d fanmode -v 1 0

to set the level to 20%, if you put less it tells you that it can't be set
ipmcset -d fanlevel -v 20
Click to expand...
That's ipmi. The uboot has memory access that ipmi doesn't have and trough poking you can disable the 20% limit. Don't answer if you missed the whole point of the question.
 
Y

Your name or

Active Member
Feb 18, 2020
241
40
28
Hi
What do I wrong?! I put an USB Dongle inside the Server and put the ESXi onto with Rufus.
Sadly the Server tell me there is no Hypervisor?!
So how to get them running?
Thanks
 
Sogndal94

Sogndal94

Senior IT Operations Engineer
Nov 7, 2016
117
74
28
Norway
Your name or said:
Hi
What do I wrong?! I put an USB Dongle inside the Server and put the ESXi onto with Rufus.
Sadly the Server tell me there is no Hypervisor?!
So how to get them running?
Thanks
Click to expand...
Emm, just to understand you correctly... You got an iso with the vSphere os, and make the USB bootable with rufus.(Correct up to this point)
Then did you pick the USB drive as a one time boot, and booted in to the vSphere installer? Then installed it on a HDD/SSD? and now it wont boot?
Then you might need to set the drive(s) you set as the install target as first boot device.
 
Y

Your name or

Active Member
Feb 18, 2020
241
40
28
Sogndal94

Sogndal94

Senior IT Operations Engineer
Nov 7, 2016
117
74
28
Norway
SD Card and USB boot no longer supported in ESXi 7,3+ . You need an HDD/SSD to install the newer versions.
So the issues is that you are unable to boot to the vSphere installer USB?
Did you pick it under the boot manager? (Press F11 or F3 to go to the boot manager screen for selecting boot option)
 
  • Like
Reactions: Your name or
You must log in or register to reply here.
Top Bottom