Has anyone here experienced these motherboards not taking the manual memory clocksettings? I have two dimms per server that are on the qvl, that are 2666mhz but downclock on auto to 2400. If I follow the manual I read I have to run them at 1866, but when entering 933 the systems do a couple reboots and when I look in the bios they are back at 2400. All the while still chucking ecc errors
I currently have 4 dimms I can try over 2 boards and they both have the same issues. It does not matter much what sticks I put in what board. Have also memtested for a good 8 passes with no issues. What makes this a little difficult is that sometimes a system boots without throwing ecc errors and then after sitting a while, we are back at it.
HMA82GR7AFR8N-VKT3 are the modules im using and listed on the qvl so im not really sure what to do. Im still running the original bios.
I currently have 4 dimms I can try over 2 boards and they both have the same issues. It does not matter much what sticks I put in what board. Have also memtested for a good 8 passes with no issues. What makes this a little difficult is that sometimes a system boots without throwing ecc errors and then after sitting a while, we are back at it.
HMA82GR7AFR8N-VKT3 are the modules im using and listed on the qvl so im not really sure what to do. Im still running the original bios.
Last edited: