Thanks!In case anyone else wants to use SNMP with this board: I got the MIB-file from Gigabyte - including explicit permission to share it.
I can finally gather basic server information with Node Red for monitoring again
EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen
- Thread starter flobert
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
needs OS support too thought, you have to declare the port as removable device.
Nah, that wasn't the case. But i figured it out. On intel platforms there are 4 sata link power manamgement policies
- max_power
- medium_power
- med_power_with_dipm
- min_power
med_power_with_dipm and lower disable port sensing, so if you remove a disk in that state, the host won't notice, and after that the port is disabled. Well, here it seems that even medium_power has that effect. So only max_power seems to work for hotswap
- max_power
- medium_power
- med_power_with_dipm
- min_power
med_power_with_dipm and lower disable port sensing, so if you remove a disk in that state, the host won't notice, and after that the port is disabled. Well, here it seems that even medium_power has that effect. So only max_power seems to work for hotswap
Latest BMC and bios. 3900x installed and debian running, but i get this at zeroes. Is it normal or some weird bug?
if you have a PSU over PowerDistributionUnit connected over PMBus check cables.
if you have std. ATX PSU this is normal.
Stable without any problems, running Proxmox. VM with GPU pass-through and 64GB RAM used as everyday workstation, remaining memory split between small VMs and ZFS cache.
Since about April of last year, I've been running 4x32 Crucial/Micron DDR4-3200 ECC UDIMMs. SKU is MTA18ASF4G72AZ-3G2R . dmidecode shows part number 18ASF4G72AZ-3G2F1.
I ran memtest quite a while on this (probably 48 hours?) initially, and have been running with zero issues since. Originally with a 5700x and more recently with a 5950G.
I am just using a cheap half hight one from Ali Express. Only cost a few pounds.guys, for these of you using this board with Asus hyper m.2 v4, what case are you using? there are not many large micro-atx compatible cases that will fill long full PCIE cards. I have tried JONSBO N4 but no joy
Hi Everyone, i am new here and i am posting in this topic due to a little desperation...
I have been labbing/configuring a little bit with NginX Proxy Manager with adding SSL to all my internal sites through nginx.
Stupidly, I added my certificate to the BMC management console (thinking i could use that when connecting to the BMC web portal) and after that i can no longer reach the BMC web portal.
I have tried resetting the BMC through the terminal of the host OS and it seems to be reset to the defaults, but i am still not able to access the web portal for the bmc.
How screwed am i? anyone else been through something similar?
I have been labbing/configuring a little bit with NginX Proxy Manager with adding SSL to all my internal sites through nginx.
Stupidly, I added my certificate to the BMC management console (thinking i could use that when connecting to the BMC web portal) and after that i can no longer reach the BMC web portal.
I have tried resetting the BMC through the terminal of the host OS and it seems to be reset to the defaults, but i am still not able to access the web portal for the bmc.
How screwed am i? anyone else been through something similar?
try to reflash BMC FW with socflash.
if oyu add your own cert. you have to configure your browser to use it too(don't ask how)
Thanks for the answer.
Can i reflash the BMC without having access to the portal? can it be done through the bios? currently i cannot access the bios so i cant check.
if you can't even boot to EFI or dos you are out of luck thought.
socflash/gigaflash.efi (check inside the FW folder)
Hi, sorry for the miscommunication, the reason i could not access the bios was because i did not have a VGA cable, but i have one now, so i can access the BIOS.
As i am running truenas on this server, i guess i have to boot up another OS to run socflash/gigaflash? Where exactly can i find this gigaflash program?
As i am running truenas on this server, i guess i have to boot up another OS to run socflash/gigaflash? Where exactly can i find this gigaflash program?
efi can run in integrated EF Shell(Boot option)
you find the utils in the BMC Firmware ZIP you have downloaded.....