Hi, I tried to test the X11DPi-NT board, with CPUS QJW0 and memory, and it was a failure.
The problem is with the MB, which does not turn on.
When connecting the power supply, the Baseboard Management Controller (BMC) Heartbeat LED flashes normally and the board can be accessed via IPMI without issue.
But the onboard power LED that should light up when the power cord is plugged in, doesn't light. This LED indicates that the system is powered and should be green before turn on the MB whit de buton.
I have checked all the jumpers and they are in the correct position.
I connected the power supply to another gigabyte MD and if it turns on the System Power LED.
I follow testing with power supply, but afraid the problem is with the motherboard and I will have to return it if the seller wants, because it is from eBay ...... A disaster.
If you have any ideas, it is welcome.
Sorry for not being able to test the two BIOS I had for the Xeon QJW0, hopefully I'll try it sometime
Greetings.
The problem is with the MB, which does not turn on.
When connecting the power supply, the Baseboard Management Controller (BMC) Heartbeat LED flashes normally and the board can be accessed via IPMI without issue.
But the onboard power LED that should light up when the power cord is plugged in, doesn't light. This LED indicates that the system is powered and should be green before turn on the MB whit de buton.
I have checked all the jumpers and they are in the correct position.
I connected the power supply to another gigabyte MD and if it turns on the System Power LED.
I follow testing with power supply, but afraid the problem is with the motherboard and I will have to return it if the seller wants, because it is from eBay ...... A disaster.
If you have any ideas, it is welcome.
Sorry for not being able to test the two BIOS I had for the Xeon QJW0, hopefully I'll try it sometime
Greetings.