got proxmox installed on it, have it running currently completely off the wifi card, attempting an opnsense vm and passing through the nics to see if i can get it to work that way
All the NICs work, including the switch, it's more of an issue to set them up in your RC/boot scripts to have them mapped out correctly (both on BSD and Linux). Native support is still a bit better on BSD, but on either OS you can map the ethernet switched ports to individual VLANs, or Q-in-Q interfaces, or you could bundle them all together.I've got a edge 620 en route. Any progress on getting all the NICs working? Any recommendations for dumping as much of the factory images as possible before proceeding with any updates, etc? Just in case any of my files end up being useful for others... Thanks!
I think I have the I2C for that, it even has a PWM mode! Still have to dig the project back up before I can get back to itMinor detail. These have an RGB LED on the front. It defaults to white. If we can determine the relevant I/O, I can probably get it linked to Home Assistant or OpenWrt.
Hello,Where do i find my serial # for the bios password? It's not on a sticker as i'd expect.
in diagos i see TW0GXYDHDNG0019T#### where #### is 4 digits. That with a ! on the end doesnt get me in bios where i can sort out my boot order and stop booting off usb to bypass the emmc that's first
I just wanted to say thank you for all of the information you have shared so far. I've got a VEP1400 that I was getting going by messing with the scripts from DiagOS. Would have been much easier if I'd come across this thread sooner.I think I have the I2C for that, it even has a PWM mode! Still have to dig the project back up before I can get back to it
Did you get all the interfaces passed through? I have BIOS 3.50.0.9-10 dated 07/23/2020 and still can't pass through 3 of the 4 I350 ports. According to this discussion, it's a BIOS bug. I contacted Riccardo and he says he's switched employers and has no access to the BIOS version or file. According to this article, the latest BIOS was 3.50.0.9-13, but VMware had no way to update.update got opnsense working as a proxmox vm, got the ix interfaces passed through, it's late will do more futzing around and set up the opnsense fired connections and test them out, make sure they work, then add a second vmbr and add a wired connection to proxmox, migrate over to that, pass the wireless card through to opnsense and see if i can flip it into an AP (this may work hardware pass through, not confident, may have to bridge it through to opnsense to get it to work as an AP)
I don't have anything that's 10Gb capable other than a PC and I haven't run any speed tests. The link says 10Gb.Prices for the 620 are in the $75 range now, so I'm picking one up and see if I can use it on my comcast 1.5Gbps connection instead of a VM I'm running right now. Probably safe to say I'll be dropping some questions in here; I've got Cisco 10G-SR SFPs that I'll be trying to use in the box, hopefully they will play nice.