I can confirm later but I believe they do. You might want to look at airflow if you do that though, the fans vent out the back of the switch and blowing hot air out and down might not give the best result.
I just setup my first switch and had the same problem. I don't know if you solved the issue or not, but instead of changing anything on the switch I made an alias on my client to make it easier to remember:Is it possible to update the SSH server? It is using an old algorithm so I have to connect with ssh -oKexAlgorithms=+diffie-hellman-group1-sha1
Hmm, I guess it is a little reckless to globally allow it. I've edited my original response to use a bit more "secure" method with aliases instead of globally allowing it.That is dangerous and definitely not recommended.
Host icx6450 icx6450.localdomain 10.1.1.75
KexAlgorithms +diffie-hellman-group1-sha1
PreferredAuthentications keyboard-interactive,password
Take a look at these guys if you like to PoE things. Super cheap for standards complaint PoE. I've added them to a couple wireless routers, cable modems, a thin client, even my uverse cable box.SX6012 + ICX6610 has been the best purchase combo for me, especially after following the resources available around here.
6012 does my cluster (sic) fabric, I'm still working through RDMA setup, this uplinks 40Gbs to my 6610 which handles the 10Gbe side of thinks and POE to my AP's, ipcams, viop phones and I'm now looking at the poe hack for rapberry pi (for z-wave).
I might get another 6012 and 6610
It stays the same, I'm thinking of replacing the rev A power supply with a rev c or two rev B and I think a chassis fan needs to be replaced as it has a high pitched whine.Does it at least get way quieter after boot? After how many people in here ended up having them run full speed because of older power supplies and what not, I'm now paranoid half of you are living with switches that are way louder than they should be
Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A Micro USB 4 Raspberry LS | eBayI'm now looking at the poe hack for rapberry pi (for z-wave).