APC AP7952 PDU Issues

[lte]

Hi guys,
as the APC forums are more or less dead, I wanted to tap your collective knowledge.

I have an APC AP 7952 PDU with 24 outlets, 21x C13 3x C19 connectors.
After updating the AOS firmware on the PDU (to 3.9.2), the web interface and console now only report 8 outlets (those in the middle, next to the display) with the others being dead.

Further it somehow removed the model, serial, hardware revision and mfg date entries on the management card and changed the MAC to this interesting combo.

Anyone got a clue how to manually write them back?


Any ideas are greatly appreciated

 

[Scott Laird]

Odds are you managed to flash the firmware for a similar (but different) model. Double-check that you grabbed the download that you expected from APC's website (it wouldn't shock me if they screwed up), and then try reverting one rev if possible?