A1SRM-2758F - Hyper-V keeps rebooting

[EeyoreDK]

Hi

I am trying to install Hyper-V Server 2012 R2. It seems to install just fine but after that, it keeps rebooting with the following error. Any ideas on how to solve this?

 

[cesmith9999]

Visualization turned off in UEFI/BIOS?

Chris

 

[EeyoreDK]

No, ESXi and Hyper-v 2016 runs fine (except no nic's in 2016)

 

[j_h_o]

Latest BIOS flashed?

 

[cesmith9999]

If you can get a memory.dmp I can look at it and possibly see what is wrong.

Chris

 

[EeyoreDK]

Latest BIOS flashed?

Yes

 

[EeyoreDK]

If you can get a memory.dmp I can look at it and possibly see what is wrong.

Chris

Thanks for the offer, but I have no idea how to do that.

 

[EeyoreDK]

Hmm, I installed Server 2012 R2 without problems. NIC's also installed fine. I then enabled the Hyper-V server and now it keeps rebooting with the same error message as above.

 

[cesmith9999]

control panel -> system -> advanced system settings -> advanced tab (startup and Recovery settings... button)

Write Debugging information - set to complete memory dump.

zip the MEMORY.DMP file. and send me a PM on where to find it.

Chris

 

[MESSERCHMIDT]

same issue on a asrock n3150m matx board with hyper v server 2012 r2

 

[Kristian]

Same issue with my Supermicro A1SAM 2750 F and the Supermicro A1SAi 2550F with Windows 10 unsing HyperV and Windows 2012R2 using HyperV

 

[cesmith9999]

Without a DMP file I cannot help you.

Chris

 

[Kristian]

I switched to ESXi, otherwise I would have been happy to provide you with the DMP files.

 

[MESSERCHMIDT]

I cannot finish the install of hyper v server 2012 r2. If I pull the ssd from that system, can I somehow access the dmp file from another system to send you?

 

[cesmith9999]

that would work. it is located at c:\windows\memory.dmp

Chris

 

[Jeggs101]

Does it do that on UEFI and non-UEFI modes? I'd install NOT UEFI.

 

[MESSERCHMIDT]

i dont see a memory.dmp file in the windows directory

maybe because the install did not finish? im going to zip the contents of the entire dir and upload them to dropbox or such

 

[MiniKnight]

Does it do that on UEFI and non-UEFI modes? I'd install NOT UEFI.

I'd do this too. That error is def some BIOS or UEFI issue. I've got a bunch that have over a year of uptime running Hyper-V Server 2012 R2.

 

[MESSERCHMIDT]

this board only has uefi, not sure how to install it otherwise

edit: uefi only on this new asrock, no legacy options

maybe that is why hyper v server 2016 and windows 10 work without issue

 

[canta]

this board only has uefi, not sure how to install it otherwise

edit: uefi only on this new asrock, no legacy options

maybe that is why hyper v server 2016 and windows 10 work without issue

go to BIOS, find CMS (compatibilty support mode) under boot menu selection.