power

Hi, Noob here. I've purchased an OCP rack server and am trying to devise how to power the thing. I've assembled a list of parts and my approach seems plausible, but I wanted to run it past some smart people in case I missed some obvious issues. The server is a Gigabyte T181-G20. The TDP...

I just got an HP Prodesk 400 G4 mini to tinker with as a first basic home server, the current specs are g4900t, 8gb single stick, 970 evo It came with an off-brand power supply, 65W 18.5v, and it seems to work fine but from what i can see the original is 19.5v. Could i encounter any issues? is...

What kind of idle power consumption are people seeing with these procs? In case it helps, I'm likely pairing the 5955WX with a Supermicro M12SWA-TF on a new Windows 11 workstation build. How would this compare (in terms of idle power consumption) with an EPYC 7313 or 7343 with a Supermicro...

I've acquired a T7600 motherboard that I was hoping to put some cpus I have into, but I'm struggling to find any info on the power pinouts for this motherboard. Theres a 24 pin and a 20 pin power connector, does it need both or can it run on just one, is the 24 pin standard atx? (it does seem...

Not sure how interesting this will be to people, since POWER8 is a very niche architecture, but anyway I ran into this: Tyan Rack 2U Server TN71-BP012 1x IBM POWER8 10-Core CPU 2,926 GHz 2x 750Watt 299€, currently showing 7% off Seems like a good deal for anyone wanting to get their feet...

Hello all, first post here on STH, but i've lurked quite a bit. I participate in the SETI@home project, and I'm doing some brainstorming on a possible new build. So I would like to ask your opinions on some setups. I apologize if this belongs in another forum, but I am not sure which one would...

Hi Guys, I have a 4U chassis with 24 bays for 3.5" drives currently, but it is short depth at only 550mm. With the hardware raid controller and SAS expander I have, the area for the mobo is pretty cramped, and I am thinking of offloading the compute part of the machine to a seperate chassis...

Hello, I just acquired a Supermicro 846e16-r1200b chassis and notice the power/led panel cable cannot reach the system panel on the motherboard, ASRock EP2C602. It is too short. Is there a concept of a power/led panel extension cable? If so, where can I purchase one. I'm also considering just...

I've got two APC8641 PDUs. These were in use for a little over two years as A/B power in a datacenter. They are 200/208V power, can be networked, and over the network you can monitor and power on/off each outlet. Currently located in the eastern US. Official Product Specs My eBay Profile...