Search results

Yes, I maintain this repo that works with the current proxmox (4.4) release. GitHub - btolab/iomemory-vsl: Updated FusionIO driver for recent kernels.

I am trying to get one of these going. After a little hacking, I've got the linux kernel recognizing and attempting to init the card, but it's failing because the card needs to be setup / partitioned first.. I'm assuming there are utilities to setup the card, but so far my search has come up...

MELLANOX CONNECTX-2 671798-001 HP 10GB PCIe 10GBe ETHERNET NIC Seller offering "new" cards for $15/OBO + shipping (vs all the used ~$18 shipped ones on ebay). Total for me is $27 shipped per card. In the auction description, he states bundle pricing is available.

In for 2, thanks!

According to cpu world (grain of salt), the feature differences from retail are no enhanced speed stepping and no VT-d. But when you do a side-by-side, it's only missing trusted execution. I'm very interested, but lack of VT-d is a deal breaker. SR1Y5 (Intel Xeon E5-2676 v3) SR1XS (Intel Xeon...

That is exactly what mine did. Even after POST and full boot (windows, esxi, or linux) the fans were always loud (iirc 5000rpm).

I already sent mine back, but I'm positive SSH access to the IPMI using the root account cannot be changed or disabled. Test using: root/superuser or: anonymous/anonymous

There's another thread with these. I returned mine for a number of reasons (plus damage from poor warehouse handling). BIOS is slow.... makes supermicro seem like insta-boot. Good luck setting the boot order or uefi boot reliably. First gen motherboard, ipmi sucks, enjoy the root backdoor you...

You need to use the smaller size BMC and BIOS. System comes with the first generation motherboard.

I haven't ordered them yet. Doing stress tests first. Regarding the shroud, nothing is missing. According to the technical manual, the various mounting locations on top of the shroud are for addon raid modules (BBU, etc). Be sure to update the BIOS and BMC. Fixed booting an existing gpt EFI...

Mine is exactly the same, looks like a part to the shroud assembly is missing. The C2100 case looks very similar, so I'm thinking these rails will work. Dell C2100 Outer Rail ball bearing kit for Poweredge C2100 FS12 PN# W251N

My Quanta arrived today. Seller accepted $289. Uploaded a bunch of pics to imgr - Quanta S210-X22RQ

For others looking at these low cost switches (with great firmware btw) just be careful, IIRC the "C2H" series are all 100 mbit ports with Gigabit SFP ports. C2G are gigabit. I would recommend getting the "C3G" series. They come up cheap on ebay every month or so.

If I did not already have one, I would snag this up. It's good.... you want it. Seriously. Aruba Networks Mobility Access Switch S2500-24P-4x10G POE; Model: S2500-24P-US It's a little picky with SFP's. I ended up ordering SFP's for $19/each from Fiberstore (specified Aruba 2500 in the order...

Try turning the watchdog option off in the bios?

New 671798 001 HP 10GB Mellanox Connectx 2 PCIe 10GbE Ethernet NIC | eBay I have two of these. Work really well in my Linux boxen. I've used HP DAC's, Cisco DAC's, and Fiberstore SFP's (flashed for Aruba spec) connected to a Quanta LB4M and an Aruba S2500. Comes with HP firmware, but can be...

Test results look pretty good. sender = dual Xeon X5360, receiver = dual Xeon X5660 [root@pxe ~]# iperf3 -s -i 1 ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.1.1.184...

When you When you do get the switch, please share what firmware it's running.

Before you go buying one of those, check this thread: https://forums.servethehome.com/index.php?threads/interesting-quanta-switch-48x-gbe-4x-sfp.4412/

It took me about a month to snag my main switch, Aruba S2500-24P for $245 shipped. 4 SFP+, L3 routing, and POE. Patience is key.