Search results

Hi, got that board and have some trouble with it working with a pair of AOC-SLG4-2E4T's I have. The AOC's manual said to set some Bios options I didnt have so I went along and updated the Bios and the BMC FW. I still don't have the Bios option but in addition to that I now have a problem with...

Hi, does anyone happen to know if an Amphenol 100G split cable (AHST P/N NDAQGF-0006) will work with Mellanox switches/cards? Thanks

https://www.ebay.de/itm/386594529873 Damn, if I only had even the slightest use for those

https://www.ebay.de/itm/386423626574 FW HPK2 I'd have gotten some if they had been original Intels (firmware), but so ... up for grabs ;) 7 left Note seller says new but describes low usage hours in description. Also illustrations only no actual pics.

Hi, I assume not too many Intel Board users here, but maybe... I have an Intel S2600STB that is running with a pair of 6150's . Everything was working fine until, after a few days of not using it, it wouldn't power up any more. The diagnostics led's code is not in the manual (4 amber all lit...

Hi, anyone know where i could get an Intel GPU Kit for the P4000 Chassis? Can't seem to find it anywhere (not particularly surprising given its age). Want to try to add a GPU to a server board in that Chassis and not too keen on daisy chaining molex adapters to get 2x8 pin GPU output ... The...

I mentioed in one thread or another that I had a script to automated test ZFS pools. Since @TrumanHW seemed to be interested and it seemed a waste to have it on my drives and nobody uses it I uploaded it to GitHub. I probably need to do a lot of cleanup, starting with the GitHub Readme;)...

The kid has a lot of troubles with his gaming PCs. The old one was a 6900K which ran fine (heavily overclocked) but during its lifetime it murdered a Quadro RTX5000 (while the previous RTX4000 ran fine for ages). Well maybe the board is innocent since we have similar problems on the new system...

Mellanox MSN2100-BB2F Spectrum 40GbE 1U Open Ethernet Switch | eBay, 2 avail Should run 100g similar to the ones here: https://forums.servethehome.com/index.php?threads/gone-mellanox-sn2100-40g-16-port-eur1500-msn2100-bb2f.38910 Outer Screws are from rails only, so no problem

https://www.ebay.com.au/itm/234897507584 FHB only it seems, but quite cheap

Another interesting deal for ppl who like to play - NV-DIMM Paket Battery Agiga Supermicro | eBay This contains 3 generationss of NVDimm-N's , DDR3, DDR4-2133 and DDR4-2666. Just note that per Micron you need to make sure to match the batteries to the modules correctly, but I have no clue if...

So this is not the best deal ever o/c but they are pretty scarce and especially in EU. https://www.ebay.de/itm/295496850058 https://www.ebay.de/itm/295496839505 These run at 100G , are technically EOL (only available as 100G variants now I think) Seller also has rail kits for a good price

Hi, a question for the Cisco ppl out there - I am looking at netflow (v9 or flexible) data and can't seem to find any information about which switch actually sent out the flow data. Theoretically I can deduct it from next-hop, but on my private Elastiflow setup I get a nice list of all...

Edit - post is half for asking, half for myself to update with switches I find when searching them and discussing ----- I am looking for a new switch or two since the ICX7450-48p I run now is a power hog (as is the 7450-24 non poe I have as counterpart at 53 for a few 1G and 1 40G uplink)...

Since this thread has evolved from me looking for caddies to discussing the box itself we had it moved to this subforum. The old content is below and the first couple of posts and stays for consistency. The server is available as barebone for €29 shipped (within Germany likely only) here...

A few month ago I imported some ICX7000-1X40GQ's for a 7450... they've been sitting on a shelf since then. Today i wanted to add one to the switch only to find that it doesn't fit in the module bay. I thought that all these modules for the various officially compatible switches were identical...

Morning, Bought a 7150-48 without realizing that the rj45 uplink ports are not 10G on that model. Can send it back but wanted to check if anyone needed one at €250 + p&p. Used, with 1y warranty, with rack ears and cables (power, serial)

Anyone having experience with Flux willing/able to help out? Looking to convert an Influx query to a Flux query for a Grafana power consumption panel... Influx query works fine for everything at day or hour level but wont do month or year ... SELECT SUM("power"::float) / (60.0 ) FROM (...

I stumbled over this earlier http://www.lavancom.com/portal/download/pdf/catalog/Handbook_datacenter.pdf I don't think it was intended for the public, but its a very nice introduction into 2014 era datacenters including detailed information about what is used in a DC down to media types and...

I experienced some issues while trying to flash a brocade switch, all of a sudden the com port was not working any more from a windows vm (had worked fine the eve before. I solved this by moving the com connection over to a physical box (tnc). Now i needed a Win VM again to flash (mellanox...