Search results

I am out of ideas with these C240M3S systems with the 9271CV-8i. I have two of them and both have issues where the 9271CV-8i will randomly disappear, and or the VD will disappear, and or it will detach a new hard drive like its failed. This happen on reboots or warm reboots but if the server is...

I would like to hear your opinion, is the Cisco C240-M3 24 bay worth the used/refurbished price point (2-2.5k)and are they reliable? The purpose of this machine would be to have a reliable 2U hypervisor that has storage flexibility. I would expect 2x Xeons 10c and 192+gb mem sound about right at...

Does any one know of an external usb 3.1/C enclosure that will house an M-Key 22 x 110 Samsung MZ1WV480HCGL MZ-1WV4800 drive? Can tell if this one works with m-key drives

I am having a very difficult time finding examples and the Samba documentation seems to be out of date or I'm not finding what I need. I do not have any question related to hardware I am fully aware of the hardware requirements my focus is on software only please. My current setup is on RHEL...

Does anyone have a windows x64 driver for XX2X2 mezzanine? Trying to install 2012 r2 dont know if a 2008 R2 x64 driver would also work.

WTB: C6100 XS23-TY3 Barebone Motherboard with no heatsyncs, ram, or sled. Rev A02 or above is preferred. I had of my blade MB just go up in smoke! These things are really starting to be unreliable :( but they are so cheap it is hard to not stick with them.

WTB I'm in need of a dell c6100 blank sled to replace a broken blade. It should fit a 4 sled chassis system.

I'm trying to test one of my c6100 xs23-ty3 blade(s) to find out if I have issue with a blade(s) or a chassis slot(s). I purchased a couple ATX 24Pin 24 Pin 24P + CPU 8Pin 8P to Mini 18Pin 18P http://www.aliexpress.com/snapshot/6175344145.html to power the main board via an atx power supply. I...

Does anyone know of a motherboard with 6+ PCI or PCI-X (not pci-e) slots or a combo of both? I would think that it would have to be an extended atx (e-atx) board. PIKA CARDS

Looking on some ideas for a low cost chassis that supports a minimum of 6 full length PCI cards? This will be an for an expansion unit so no motherboard is required just power supply and pci back plane. I'm looking for something other than the mainstream portwell and magma chassis. I will need...

Not a bad deal on a 3 meter Mellanox cable $49. Can t even get them this cheep on EB@y.

I had a little trouble finding this info just though I would post it up. Here is my config. Got info from here Please add if I'm missing something. root@SAN-0B:~# dladm show-ib LINK HCAGUID PORTGUID PORT STATE PKEYS ibp0 2C903002B170E 2C903002B170F 1 up...

I have a c6100 with the dual mez infiniband cards in all nodes and an infiniband switch. I have a SunFire x4540 with 48 tb's raw currently with no OS installed software raid only (would like to run zfs) with infiniband connectx2 card. The c6100 nodes are all running Windows server 2012. I'm...

I have a c6100 with the dual infiniband cards in all nodes and an infiniband switch. I have a SunFire x4540 with 48 tb's raw currently with no OS installed software raid only (would like to run zfs) with infiniband connectx2 card. The c6100 nodes are all running Windows server 2012. I'm having...