was provided to customers by DCL(NDA) at the lauch of E0 ES. imho no chance now.
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
You can compare the benchmark results of Dhamov/Josef and others even yourself, E
0 with 8channel 4800mhz memory should reach 250gb/s in read test.
D0 and E0 have different silicon wafer, so may have different IMC design.
Last edited:
we have to buy and test. mostly all sellers even don't know D0 is working on ASUS/ASRock W790
working: Q03J, to be continued
not work: Q0KG, to be continued
i expect all Q0K* do not work, but Q03* to Q08* could work,
available but untested(not complete list):
QO3K 56c 350W
Q03L 24c 350W
QO3Y 56c 350W
QO8T 24c 350W
QO3U 24c 350W
Q03V 24c 350W
QO3Y 56c 350W
QO3Z 56c 350W
Q08V 56c 350W
Last edited:
There is only one compatible E0 that I have seen in the wild and is also worth getting, and that's the Q03J. 60 cores, 3.5 GHz Boost.
Make a summary of E0 here. @RolloZ170 Is that correct?
The part of "tested" in late E0 are still speculative, because all Q0K* should have the same compatibility but some QDF too rare to find any test report.
Over time, some motherboards may lose ES support.
The part of "tested" in late E0 are still speculative, because all Q0K* should have the same compatibility but some QDF too rare to find any test report.
Over time, some motherboards may lose ES support.
Last edited:
Too bad I've never come across a Q0KM...
Never seen Q03K, Q03Y, Q03Z, either, btw, which is why I only recommended the Q03J as E0 compatible with ASUS W790.
Never seen Q03K, Q03Y, Q03Z, either, btw, which is why I only recommended the Q03J as E0 compatible with ASUS W790.
Last edited:
Great Table. Is Q0KG already tested on ASUS W790? I was planning
to do it tonight or tomorrow, just to make sure. But if i can save time...
I don't even know how many bugs there are on the table.
Rollo tested some Q0K* on W790-ACE, all no work. But you better test, it's makes sense and easy.
On the first look it seemed to correlate with my experiences. And i like the idea of segregating in: tested, untested, probably works, probably does not work. Later i thought again about is this ebay offer of X13SEI and a Q03J, so i guess with some bios, it might work. Screenshot in offer is however made with MS73 board.
With 1.0 debug/test BIOS it will work maybe. But as you tested, Q0KG works out of the box and is not much weaker than the Q03J.
regular SPR-SP do not work on W790(not ASUS W790, not SM X13SRA)
only stepping D0 and some early E0.
Thank you very much for your response it does appear to have D0 stepping although its in chinese - images are attached, could this be of any use to you to help me guess if this could work for me? Thanks again for the help
yes this QYFU D0 ES2 work on ASRock WS W790.
this is not 8461v but similar. if you write 8461v i expect a prod.unit or QS.
Ok perfect thank you, sorry that is my bad there I forgot to mention that part. I don't suppose you know would this unit still allow stuff like the inbuilt thunderbolt ports, U.2 port and M.2 slots to still work, I can see stuff gets cut off on the boards designed for the 3400 series. Thanks again for this info, I've been browsing the whole thread but still felt unsure
i see only 64 PCIe 5.0 lanes connected, so all should be usable even with a W-2400
Thunderbolt and U.2 comes from PCH W790.
Ok that's perfect, I assume that I would also have full functionality of the W790-ACE too with this CPU if that's the case? just the W790-SAGE is crippled?
really appreciate the help, been looking to build something modern for a while now, I have the C621E Sage but this should be a nice upgrade