Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
Why not? It's cheap. ZFS loves RAM.Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
I wouldn't say it's cheap. I found one for $230 CAD, which is a bit more than the unit itself (no ram, no ssd).Why not? It's cheap. ZFS loves RAM.
I thought the 32GB I put in this unit for just opnSense was overkill, but I just had one laying around. for 48GB and one would need a lot of containers, but then you'd run into a bottleneck with the CPU. I don't really get it either if ram stick was purposely bought for N100/N300 unit.Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
Can you post the purchase link for this unit?Ordered the CW-AL-4L N305 tall-fin (case Type C, I suppose), and the Unit, arrived, yesterday.
I received a CW-AL-4L-V2.0 N305 tall-fin Unit
I confirm that it is 1.25mm pitch for FAN. I just don't know the pinouts whether they are compatible with PWM FAN.That could be a fit. for the COM port. I might buy some and try it.
I was initially thinking the fan connector looks to me (for the CW-ADLN-6L) as a 1.0mm pitch JSP SH Series connector
but looking at the photo again it may be 1.25mm pitch. I have some connectors in my cart, but it will be a couple of weeks before I order anything.
I'm interested to follow up the same topic.It looks like I've narrowed it down to the N100 on CWWK's AliExpress store (cheaper in CAD$ to do it that way) (This one). I have a 3Gig/3Gig PPPoE connection. Anyone running Proxmox and PFSense with a similar speed using PPPoE? I just want to make sure I have the CPU to max out the NICs. My current i5-4570S does it without a sweat (20-30% CPU) but it's power hungry and I'd prefer to reduce that.
Grab https://downloads.openwrt.org/relea....05.2-x86-64-generic-ext4-combined-efi.img.gzHello everyone! I have an n305, tell me how to install Opewrt?
Here ya go:Can you post the purchase link for this unit?
Be careful and measure.try to find ground, then 12v and 5v then you will know, just simple use multimeter
View attachment 32787
I ordered a x86p5 from the “cwwk pc store” on ali on the 11th and it shows as shipped on the 15thSo somehow my Ali order has not shipped for 5 days now - anybody else seeing the same?