Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
Why not? It's cheap. ZFS loves RAM.Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
I wouldn't say it's cheap. I found one for $230 CAD, which is a bit more than the unit itself (no ram, no ssd).Why not? It's cheap. ZFS loves RAM.
I thought the 32GB I put in this unit for just opnSense was overkill, but I just had one laying around. for 48GB and one would need a lot of containers, but then you'd run into a bottleneck with the CPU. I don't really get it either if ram stick was purposely bought for N100/N300 unit.Can anyone tell me why You put 48GB ram in n100/n305? What container use so much memory?
Can you post the purchase link for this unit?Ordered the CW-AL-4L N305 tall-fin (case Type C, I suppose), and the Unit, arrived, yesterday.
I received a CW-AL-4L-V2.0 N305 tall-fin Unit![]()
I confirm that it is 1.25mm pitch for FAN. I just don't know the pinouts whether they are compatible with PWM FAN.That could be a fit. for the COM port. I might buy some and try it.
I was initially thinking the fan connector looks to me (for the CW-ADLN-6L) as a 1.0mm pitch JSP SH Series connector
but looking at the photo again it may be 1.25mm pitch. I have some connectors in my cart, but it will be a couple of weeks before I order anything.
I'm interested to follow up the same topic.It looks like I've narrowed it down to the N100 on CWWK's AliExpress store (cheaper in CAD$ to do it that way) (This one). I have a 3Gig/3Gig PPPoE connection. Anyone running Proxmox and PFSense with a similar speed using PPPoE? I just want to make sure I have the CPU to max out the NICs. My current i5-4570S does it without a sweat (20-30% CPU) but it's power hungry and I'd prefer to reduce that.
Grab https://downloads.openwrt.org/relea....05.2-x86-64-generic-ext4-combined-efi.img.gzHello everyone! I have an n305, tell me how to install Opewrt?
Here ya go:Can you post the purchase link for this unit?
Be careful and measure.try to find ground, then 12v and 5vthen you will know, just simple use multimeter
View attachment 32787
I ordered a x86p5 from the “cwwk pc store” on ali on the 11th and it shows as shipped on the 15thSo somehow my Ali order has not shipped for 5 days now - anybody else seeing the same?