Xeon E3-1270 v3 - only has one core working

[incith]

Wow...it's still in recovery mode... Ugh

 

[PDANZ]

took this screen shot from the manual located here.https://dlcdnets.asus.com/pub/ASUS/mb/socket1150/P9D-M/Manual&AVL/E8096_P9D-M_series_VER8096.pdf

 

[incith]

I've got raid on 2-3, ME on 1-2 and AMT on 1-2, AMT was on 2-3 but hasn't seen to have made a difference (pwrmode1 seems to control AMT found the descriptors hidden under sata cables)

 

[PDANZ]

Thanks for the photo. Unfortunately that is a different MB or version of the MB to the one that I have.
I don’t have those same options of details shown on the board as you do.
The other thing I did was replace the Cmos battery.

 

[incith]

 

[incith]

The details for the jumpers are in front of the sata ports, I had to unplug sata cables to see them

 

[incith]

I staggered them back to redisable AMT..I'll keep trying. I appreciate your help!

 

[incith]

This has been resolved by moving fdo1 jumper from 2-3 to 1-2. It's been there forever so this board likely never worked right while it was in production LOL (pictured in 2-3 position)

 

[PDANZ]

Well done!! Hopefully these posts can help someone in the future as well!