Hi
I hoping to flash my onboard LSI2208 (x9drl-f7) following this guide;
Flashing LSI 2208 with IT firmware to use as an HBA - My Wired House
I had a hickup @;
megarec -readspd 0 smc2208.spd
its giving me an error code (16XXX something)
Figured I move on with the guide ( I got no clue what the above step is doing anyway... >_<)
So moving on I saved the SAS address, ran the writebr empty.bin and ran the cleanflash cmd.
Rebooting the computer the LSI controller doesnt show up on boot ( guessing thats normal at this stage).
Now is where I ran in to trouble. I can't flash the card with sas2flash. Megarec still lists the card but sas2flash doesn't. And I've tried EFI 11 and 20, tried 4 different DOS versions.
Any ideas?
I hoping to flash my onboard LSI2208 (x9drl-f7) following this guide;
Flashing LSI 2208 with IT firmware to use as an HBA - My Wired House
I had a hickup @;
megarec -readspd 0 smc2208.spd
its giving me an error code (16XXX something)
Figured I move on with the guide ( I got no clue what the above step is doing anyway... >_<)
So moving on I saved the SAS address, ran the writebr empty.bin and ran the cleanflash cmd.
Rebooting the computer the LSI controller doesnt show up on boot ( guessing thats normal at this stage).
Now is where I ran in to trouble. I can't flash the card with sas2flash. Megarec still lists the card but sas2flash doesn't. And I've tried EFI 11 and 20, tried 4 different DOS versions.
Any ideas?