@MichalPL
in my case the Mellanox X3 is fixed to ETH mode.
The card is working well, but sometimes ( 10-15 starts good and 1 fail ) initialization fail at boot up.
Windows show me this errors in eventlogging:
I am using the last FW and driver already. Not sure why is problem occur sporadically.
Maybe there is any FW setting to tweak ......
in my case the Mellanox X3 is fixed to ETH mode.
The card is working well, but sometimes ( 10-15 starts good and 1 fail ) initialization fail at boot up.
Windows show me this errors in eventlogging:
Code:
Native_3_0_0: Execution of FW command failed. op 0xfff, status 0x1, errno -5, token 0xffff, in_modifier 0x100, op_modifier 0, in_param 229ff000.
Native_3_0_0: MAP_FA command failed with error -5.
The adapter card is non-functional.
Most likely a FW problem.
Please burn the last FW and restart the mlx4_bus driver.
Native_3_0_0: Driver startup failed because the hca could not be initialized.
Maybe there is any FW setting to tweak ......