Here is my sad attempt at using LibreOffice Draw for the first time (I'm a Visio guy, but I'm trying to be better).
White = 1gps
Orange = 2.5gps
Blue = 10gps
Purple = 25gps
Red = 100gps
Node 1,2 & 3 do connect to the VM 10gps, Backup 10gps switches I just ran out of annoying arrows.
Node 2 does connect to the Private Ceph storage switch too .. I was to lazy to make more arrows for it.
The Ceph private switch doesn't need to be 100gbs, but PCIe NICs come with dual 100 ports and I can't find a 4 (3) port 25gps switch.
10 port 10gps switch (w/ 25gps uplink for backup NAS) <--- can't find that but I can find 10 or 12 port 10gps switches.
10 port 10gps switch (for VMs & home LAN) <---simple
4 port 2.5 switch (for modem router/FW) <---simple
8 port 2.5 POE (MGMT/WAP) <--- can't find that
4 port 2.5 switch (for Cronosync) <--- simple
4 port 100gps switch (for Ceph Public) <---- costly can't find a 4 (3) port slower switch for less
4 port 100gps switch (for Ceph Private) <---- ditto
6 port 1gps POE + 1 10gps switch (for RPi RKE2 Network) <--- the 6 (8) port POE and 10gps uplink seem to be hen's teeth
Any ideas to make this a less expensive or simpler endeavor?
What dual port 100gps NICs should I slap in the MS-01 (PCIe 4 x8) if I go with MikroTik CRS504-4XQ-IN switches for the Ceph storage networks? RoCEv2 is not on the MikroTik CRS504-4XQ-IN so.... ???
Thoughts? Prayers?
Thanks!
White = 1gps
Orange = 2.5gps
Blue = 10gps
Purple = 25gps
Red = 100gps
Node 1,2 & 3 do connect to the VM 10gps, Backup 10gps switches I just ran out of annoying arrows.
Node 2 does connect to the Private Ceph storage switch too .. I was to lazy to make more arrows for it.
The Ceph private switch doesn't need to be 100gbs, but PCIe NICs come with dual 100 ports and I can't find a 4 (3) port 25gps switch.
10 port 10gps switch (w/ 25gps uplink for backup NAS) <--- can't find that but I can find 10 or 12 port 10gps switches.
10 port 10gps switch (for VMs & home LAN) <---simple
4 port 2.5 switch (for modem router/FW) <---simple
8 port 2.5 POE (MGMT/WAP) <--- can't find that
4 port 2.5 switch (for Cronosync) <--- simple
4 port 100gps switch (for Ceph Public) <---- costly can't find a 4 (3) port slower switch for less
4 port 100gps switch (for Ceph Private) <---- ditto
6 port 1gps POE + 1 10gps switch (for RPi RKE2 Network) <--- the 6 (8) port POE and 10gps uplink seem to be hen's teeth
Any ideas to make this a less expensive or simpler endeavor?
What dual port 100gps NICs should I slap in the MS-01 (PCIe 4 x8) if I go with MikroTik CRS504-4XQ-IN switches for the Ceph storage networks? RoCEv2 is not on the MikroTik CRS504-4XQ-IN so.... ???
Thoughts? Prayers?
Thanks!