[US][FS] Dell R730xd 24x2.5", dual 2667v4 + extras

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

reidbk

Active Member
Sep 29, 2016
118
44
28
Dell R730xd for sale. This is the 24x 2.5" chassis support SATA/SAS and also NVME on the last 4x slots with 24x drive caddies. Includes dual Intel 2667v4 processors and 128GB of ECC memory. Dual power supplies and Dell sliding rails included too! Does not include any storage.

The interesting thing is that I have a number of network and storage controller cards.
Storage wise - The system has the HBA330 card installed, but I am including a PERC H730 Raid module with battery as well.
For networking - Currently there is a Mellanox ConnectX-4 2x 25G rNDC (daughter card) installed for networking, but I also have the 2x1G + 2x10G RJ-45 card to include as well. All in full working condition with the server currently powered off in a colocation rack.

Asking $500 OBO for the whole kit, including the extra storage and network cards plus shipping to US only. The server is in central NJ and would coordinate a meet up to save the shipping.

Let me know!
 
Last edited:

BeTeP

Well-Known Member
Mar 23, 2019
653
429
63
If I were to order this on ebay today I would have paid:
barebone (chassis, motherboard, backplane, 2x heatsinks, 2x psu, random rndc, random perc mini) R730xd 24SFF - $350
2x 2667v4 - $80
8x 16Gb PC4-2400T - $110
any PERC mini card (H330, HBA330, H730P) - $30
CX4 rNDC - $40
rails - $50

All prices include shipping. All lots are from reputable recyclers with multiple units in stock. The chassis would be shipped in the original box.

Does your unit have the NVME enablement kit installed? NVME support by the backplane alone is not enough. You need to install the switch card and the cables to make NVME work. Does your unit have the rear flex bay?
 

reidbk

Active Member
Sep 29, 2016
118
44
28
Yes NVME enablement kit is installed. Just add in your 2.5” U.2 drives to the last four bays. This chassis does not have the rear flex bay.
It does though include all 24x drive caddies.
 
  • Like
Reactions: pimposh and Samir

reidbk

Active Member
Sep 29, 2016
118
44
28
We had it running with 4x retail Intel P4610 NVME. Don’t need anything Dell specific.
 
  • Like
Reactions: Samir

BeTeP

Well-Known Member
Mar 23, 2019
653
429
63
I am in the market for a similar server and I was already considering R730xd among other options. I would not have commented on the pricing otherwise. I had all parts priced out before you posted. The NVME kit and full set of caddies seem to make up the difference between fair market and your asking price. Too bad I already got all non vendor specific parts.