Hi everyone, looks like i just bricked my Thinkserver RD650 while trying to update BIOS. I´v tried to do recovery as per user manual, but it doesnt seem to work. If i remove power, move the jumper from default to BIOS recovery. After i reconnect power it should automatically power on after a while, then power off do the recovery and power on again. It powers on after while, but doesnt go off again as it should. The management console works, when i try the update again from there it just says ERROR and BIOS version shows as N/A.
Is there anything I may be doing wrong?
Or is there any other way to re-flash the BIOS thru serial or something?
Is there anything I may be doing wrong?
Or is there any other way to re-flash the BIOS thru serial or something?
Attachments
-
263.4 KB Views: 0
-
748.8 KB Views: 0
-
972.5 KB Views: 0