I've recently snagged a for-parts ICX7150-C12P off eBay, thinking it probably had the PSU issue or something. To my surprise, the PSU seems fine -- it puts out a constant 54V, and the switch LEDs light up and stay lit up.
It doesn't seem to even start booting up though. All of the (non-port)...
Hi everyone, looks like i just bricked my Thinkserver RD650 while trying to update BIOS. I´v tried to do recovery as per user manual, but it doesnt seem to work. If i remove power, move the jumper from default to BIOS recovery. After i reconnect power it should automatically power on after a...
Hello,
I have a Dell Perc 6/i that was working okay. I was trying to update the firmware via MegaRaid Storage Manager(MSM) but it gave me a error. So since i had flashed before a couple of PERC H310, i thought it would be the same.
megarec -cleanflash 0 and it worked ok.
megarec -m0flash 0...
I think i bricked my LB6M. Something went wrong during flashing to brocade and I no longer can access it using the console. As soon as the switch is powered on the MGMT 1 and 2 port lights are on. The fans stay at full speed and never reduce speed. If anyone can help with this issue would really...
I accidentally bricked my raid card while flashing the bios. It's been lying around for some time, so I honestly don't remember whether it was just an update or a failed try to reflash it with an LSI bios.
I'm guessing that it will need the care of someone who is able to replace the bios chip...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.