Hi guys,
I'm struggling to get a couple of these to work. At first I custom wired a PSU to work with the motherboards (which was turning the cpu fans on) but I was not getting any monitor output, then learning about the need for a bios update to work with the 5600 series processor I had. I purchased a 5500 CPU to be able to do this. I have also later purchased the official PSU and power distributor for the server to see if this would make a difference.
I then took the battery out and now no power is going to the board Although the blue LED which is the BMC starts to blink after sometime.
Apparently the BMC is like a life support indicator which lets you know the system is in good health, but I am still not getting it to turn on. Help please!! thanks
I'm struggling to get a couple of these to work. At first I custom wired a PSU to work with the motherboards (which was turning the cpu fans on) but I was not getting any monitor output, then learning about the need for a bios update to work with the 5600 series processor I had. I purchased a 5500 CPU to be able to do this. I have also later purchased the official PSU and power distributor for the server to see if this would make a difference.
I then took the battery out and now no power is going to the board Although the blue LED which is the BMC starts to blink after sometime.
Apparently the BMC is like a life support indicator which lets you know the system is in good health, but I am still not getting it to turn on. Help please!! thanks