I have a SuperMicro SC846, SASEL1 backplane, 1000W Gold power supply. Using a X10SRL-F motherboard.
I had the motherboard in an SC216 running successfully. When I moved the board to the SC846, plugged the unit in, the fans spun up to I would guess an idle rate, but no front panel lights are active. Pressing the power button does nothing, depressing the button for 10 seconds does not fully power the unit off, both power supplies light up green. I can successfully log into the IPMI interface but can not power on the unit from the webpage.
Are there any steps I can follow to determine if the front panel is defective or anything else I should try?
I had the motherboard in an SC216 running successfully. When I moved the board to the SC846, plugged the unit in, the fans spun up to I would guess an idle rate, but no front panel lights are active. Pressing the power button does nothing, depressing the button for 10 seconds does not fully power the unit off, both power supplies light up green. I can successfully log into the IPMI interface but can not power on the unit from the webpage.
Are there any steps I can follow to determine if the front panel is defective or anything else I should try?