Supermicro Reset IPMI via jumper possible?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

RolloZ170

Well-Known Member
Apr 24, 2016
5,441
1,644
113
all PWR connected ? 24pin and 8pin EPS.
forgot any mobo standoffs ? (short circuit)
 

UnknownPommes

Active Member
Aug 28, 2022
101
32
28
all PWR connected ? 24pin and 8pin EPS.
forgot any mobo standoffs ? (short circuit)
yep one 24 and one 8 pin connected and fully clicked in, nothing should short, i also tried to run it outside the case on top of an esd bag with the same result
 

UnknownPommes

Active Member
Aug 28, 2022
101
32
28
another thing i just noticed is that the leds on the ipmi network port are orange and red,
when the system turns on one single green network port led is light but as soon as the ipmi led you mentioned earlier starts flashing it jumps to red and orange on the network port, the other two normal network ports always stay green