I just purchased this Supermicro chassis SuperMicro 4U Storage Array JBOD SAS2 X8DAH+-F 24xCaddy SAS2 6Gbp Expander 2xPSU | eBay and was wondering if the PWS-1K28P-SQ would fit. I know the 920 does but not sure of this one thanks.
Thank you very much for the quick response. I'm new to these cases and I know I had read some psu needed a specific plugin or connector.It already has 1200w PSU in it so that means it uses the wider connector that the 1k28p-sq uses. So you can use either of the SQ PSUs
Sorry should have been more detailed currently i have the stock ones ill link them Supermicro 80mm Hot-swappable Middle Axial 7,000 RPM Fan (FAN-0127L4) and the ones i'm looking at have the same dimensions lower db with slightly lower cfm and rpm which are these Supermicro 80mm Hot-Swappable Middle Axial 5,000 RPM Fan (FAN-0074L4). Thanks once again for the quick response.Not sure what is already there. Look at the specs for what you have and what you want if the dimensions are the same then you should be good. Thankfully SM uses standard 4wire pwm fans so you have plenty of options. Just make sure that whatever you do is still pushing enough to cool everything.
Yeah thanks that was helpful I ended up picking up 3 of the green fans for 35 dollars. Haven't been able to strike a good deal on the pws-1k28p-sq but still looking. Thanks for all the great advice.