Supermicro 6028U-TRTP X10DRU-i Barebone $349

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

cooldude919

New Member
Sep 8, 2016
28
13
3
39
Been keeping an eye on ebay for a 2U supermicro x10 variant. Looking to upgrade from my natex build from 2016. Spotted the e5-2680v4 CPU's on the forum here a while back, and figured those two would go well together.

This is the cheapest ive found at $350

They also list it on their site, however i was lucky enough to get 5% ebay bucks invite so i went that route.


ESISO, the same seller of the v4 cpu's also has one, though its at $432 and says it doesnt include the HDD trays. I had offered them $375, before i saw the other one, and they countered with $420, so only $12 off the list price. After that is when i looked further and found the above, but this was the cheapest I saw prior to finding it.

 

sboesch

Active Member
Aug 3, 2012
467
95
28
Columbus, OH
I bought one of these not long ago for $349, I am happy with it. I too am contemplating the v4 CPU's. Currently using it as my main compute/storage node.
 
  • Like
Reactions: Samir

cooldude919

New Member
Sep 8, 2016
28
13
3
39
I bought one of these not long ago for $349, I am happy with it. I too am contemplating the v4 CPU's. Currently using it as my main compute/storage node.
Did you have to do any tweaking with the fans/BMC? My previous intel setup is pretty quiet, wanting to try to mirror that.
Did you do firmware/bios/bmc/ipmi updates OK?
 
  • Like
Reactions: Samir

LodeRunner

Active Member
Apr 27, 2019
553
235
43
Is it just me that wants to have a bunch of servers in a room and have an airplane throttle control hooked up to the fans so I can 'throttle up' and play 'airplane' whenever I want? I'm sure the sound would be just as awesome! :D
Anytime I want that, I just issue a RACRESET to my Dells. Then I remember why I hate cold boots and iDRAC updates.
 

sboesch

Active Member
Aug 3, 2012
467
95
28
Columbus, OH
The spare bedroom on the far side of the house has my server rack in it, SOO FREAKING LOUD! I like some white noise, but the 6028U-TRTP X10DRU-i is head splitting.
 

josh

Active Member
Oct 21, 2013
635
201
43
These supposed to be an upgrade for R720XD? What's the v3/v4 version of heavily dumped equivalent to the E5-2670/E5-2650v2?

These look equivalent to R730XD LFF but 1/3 the price. What's the catch?
 
Last edited:

Xoid

New Member
Nov 14, 2018
27
4
3
I'm taking a guess that the board is actually X10DRL-i+ and not X10DRL-i?

Four (4) 8-pin power-connectors (GPU PWR1-4) used for GPU devices
Supports full height full width cards, and can add a 16x riser card AOC-2UR68-i2XS. Couldn't find how much power you can draw from those connectors though.
 

cooldude919

New Member
Sep 8, 2016
28
13
3
39
I'm taking a guess that the board is actually X10DRL-i+ and not X10DRL-i?



Supports full height full width cards, and can add a 16x riser card AOC-2UR68-i2XS. Couldn't find how much power you can draw from those connectors though.
Correct, that is my assumption, i dont see that a non + version exists.
 

cooldude919

New Member
Sep 8, 2016
28
13
3
39
Thank you! This is amazing!
Let me know if it works out or not, but I already had the concern about it being loud so I started looking around and found that thread. Seems like there should be a way to get it under control using some of the directions in there.
 
  • Like
Reactions: sboesch

sboesch

Active Member
Aug 3, 2012
467
95
28
Columbus, OH
Let me know if it works out or not, but I already had the concern about it being loud so I started looking around and found that thread. Seems like there should be a way to get it under control using some of the directions in there.
I will play with it tomorrow and let you know how it goes.
 

cooldude919

New Member
Sep 8, 2016
28
13
3
39
I have these on my watch list, MATCHING PAIR SR2N7 INTEL XEON E5-2680V4 14 CORE 2.40GHz PROCESSOR | eBay, which seller did you use?

I offered $160 qty 2 and they countered with 163 and I accepted. Per that thread they apparently have accepted $160 before, but didnt for me. Either way looks to be a few bucks cheaper than that pair set, and i you get lucky maybe they would take a bit less on the offer for the singles.
 
  • Like
Reactions: sboesch

sboesch

Active Member
Aug 3, 2012
467
95
28
Columbus, OH
Thanks to @PigLover for his post
I installed ipmitool on one of my Proxmox hosts using these settings:
#set fan mode to "full"
ipmitool raw 0x30 0x45 0x01 0x01
#set fans in "system" zone to 37.5%
ipmitool raw 0x30 0x70 0x66 0x01 0x00 0x24
#set fans in "peripheral" zone to 25%
ipmitool raw 0x30 0x70 0x66 0x01 0x01 0x16


Noticeably quieter, I will monitor temps.Screenshot from 2020-10-22 20-14-40.png
 

cooldude919

New Member
Sep 8, 2016
28
13
3
39
Gott the unit today, packing was excellent, seller used that contouring fil-a-foam stuff. Still waiting on parts so havent been able to boot it up yet.
 
  • Like
Reactions: sboesch