{Solved] Supermicro X8DTE-F IPMI sensor issues

teflox

New Member
Aug 30, 2017
4
0
1
29
@teflox thanks for posting a hosted link! Did you reboot the BMC module after update? Sometimes that seems to do the trick
Yes I did that and also shutdown the whole server and disconnected the PSUs for a while for good measure. Still the same false sensor readings.

Not sure how, or if, to proceed from here. Thanks for your help so far nonetheless.
 

teflox

New Member
Aug 30, 2017
4
0
1
29
Tried the 02 firmware too -> same results.
I'm now back to firmware revision 2.22, because the virtual console works best with this version (at least in my case).

So for the time being I'll have live with the wrong sensor readings.
 

SIlviu

Member
May 27, 2016
68
3
8
31
Hi there, tried all links but they are expired, can you please help me with this firmware?

Thank you
 

SIlviu

Member
May 27, 2016
68
3
8
31
I had version 2.22 and my IPMI log was spamming with "General Chassis Intrusion - Asserted" (thought was the switch but I installed a jumper and was the same) and the VBAT (CMOS Battery) was fluctuating from 2.6 to 3.2V. With this firmware all is ok.

Thank you !
 
Last edited:
  • Like
Reactions: chinesestunna