Hey guys so i have some extra hardware i am playing around with right now and having some issues.
I am testing 10gb file transfer speeds and they are way lower then im wanting / expecting
Here is my test setup
Server:
Asus Z8na-d6c
dual L5520's
16gb ram
Intel X520 10gb card connected over a DAC to another Intel X520 card
2x M1015 -flashed to 9211 IR mode - ive tried other nas setups with IT mode as well
Ive tested with freenas and nas4free as well with pretty much the same results only difference is i had the cards in IT mode with full passthru to the os.
was thinking about trying to setup everything inside a normal linux distro but at this point pretty sure ive got some other issue.
Willing to try anything to see if i can figure this out with the hardware i have sitting here
I can provide any further information you guys need.
I have tried freenas and nas4free setting up a software raid 0 across all 16 drives and highest i have seen is around 460 MB/s with the M1015s flash to it mode for full drive passthru.
I am testing 10gb file transfer speeds and they are way lower then im wanting / expecting
Here is my test setup
Server:
Asus Z8na-d6c
dual L5520's
16gb ram
Intel X520 10gb card connected over a DAC to another Intel X520 card
2x M1015 -flashed to 9211 IR mode - ive tried other nas setups with IT mode as well
Per M1015 i have 8 120gb ssds in raid 0 per the cards bios
giving me 2 separate raid 0 arrays totaling around 880GB ea and a total of around 1.5 tb inside windows.
I am running Server 2012 R2 and have setup a storage pool combining the 2 raid 0 arrays.
giving me 2 separate raid 0 arrays totaling around 880GB ea and a total of around 1.5 tb inside windows.
I am running Server 2012 R2 and have setup a storage pool combining the 2 raid 0 arrays.
Ive tested with freenas and nas4free as well with pretty much the same results only difference is i had the cards in IT mode with full passthru to the os.
was thinking about trying to setup everything inside a normal linux distro but at this point pretty sure ive got some other issue.
Willing to try anything to see if i can figure this out with the hardware i have sitting here
I can provide any further information you guys need.
I have tried freenas and nas4free setting up a software raid 0 across all 16 drives and highest i have seen is around 460 MB/s with the M1015s flash to it mode for full drive passthru.