Hi
I bought an Dell Perc H310 SATA / SAS HBA Controller RAID 6Gbps PCIe x8 LSI 9240-8i M1015 from Ebay and tried to Flash the Firmware to IT.
I followed several guides, but none were succesfull, the IR Firmware is still there -.-
1st try
2nd try (needed Uefi) Updated: SAS HBA crossflashing or flashing to IT mode, Dell Perc H200 and H310
3rd and last try LSI Controller FW updates IR/IT modes
from the last post i used the *.nsh scripts, so i cant do anythin wrong.
these scripts made the same i did before and did log everything.
I uploaded the logs.
The script reads the Data from the card and writes it to the usb stick for later use.
After that it deletes the Flash Region, marked as Successfull
Then i install the Dell Firmware and this is marked as successfull too.
The next step is the failing one it seems.
Flashing the 2118itP7 firmware fails due to "Firmware Image Validation Failed"
What can i do to fix this?
Greetings
Stumpy
I bought an Dell Perc H310 SATA / SAS HBA Controller RAID 6Gbps PCIe x8 LSI 9240-8i M1015 from Ebay and tried to Flash the Firmware to IT.
I followed several guides, but none were succesfull, the IR Firmware is still there -.-
1st try
3rd and last try LSI Controller FW updates IR/IT modes
from the last post i used the *.nsh scripts, so i cant do anythin wrong.
these scripts made the same i did before and did log everything.
I uploaded the logs.
The script reads the Data from the card and writes it to the usb stick for later use.
After that it deletes the Flash Region, marked as Successfull
Then i install the Dell Firmware and this is marked as successfull too.
The next step is the failing one it seems.
Flashing the 2118itP7 firmware fails due to "Firmware Image Validation Failed"
What can i do to fix this?
Greetings
Stumpy
Attachments
-
963 bytes Views: 1
-
364 bytes Views: 0
-
706 bytes Views: 0
-
591 bytes Views: 0
-
884 bytes Views: 0