Potentially intersting braswell board for PFsense - X11SBA-LN4F

hjfr

Member
Nov 21, 2013
76
20
8
France
Braswell is the new 14nm 2015 replacement for Avoton C2000 ? Or not ?

Too many processors families... I'm lost.
 

RTM

Active Member
Jan 26, 2014
581
209
43
Braswell is the new 14nm 2015 replacement for Avoton C2000 ? Or not ?

Too many processors families... I'm lost.
The replacement of Avoton should be Denverton as far as i know, unfortunately I could not find any information about when it is expected to be released.
Braswell/Cherry Trail is the 14nm replacement of the consumer intended bay trail platform.

And yes far too many codenames going around, Airmont is the codename of the CPU core inside Braswell.
 
  • Like
Reactions: Patrick

Patrick

Administrator
Staff member
Dec 21, 2010
12,005
4,990
113
Denverton is going to be awesome, but we still have a bit of time before it is released.
 

J-san

Member
Nov 27, 2014
67
42
18
40
Vancouver, BC
I sent a note off.
Any luck checking out one of these X11SBA-LN4F boards?

Might order one soon for pfsense MB replacement.. I don't suppose there should be any hardware compatibility issues for pfsense 2.2.4?

The current Supermicro X7SPA-HF-D525 that I have is a little funky.
(keeps sitting there after POST after power loss, waiting for "Press F1 to reset defaults".. and waiting and waiting. )
 

pyro_

Active Member
Oct 4, 2013
745
164
43
The earlier x10 bay trail version was under 200$ so I figure that this one will be around the same once in retail which is not too bad considering
 

PigLover

Moderator
Jan 26, 2011
2,975
1,283
113
The earlier x10 bay trail version was under 200$ so I figure that this one will be around the same once in retail which is not too bad considering
The Bay Trail board didn't include the BMC. Might be a bit more this time with the IPMI - but probably not too much.
 

pyro_

Active Member
Oct 4, 2013
745
164
43
Did a quick search on google and found a couple of listings for it in the 220-230 range which sounds about right