I would also love to find some risersWhile on the subject; mine are ex-risers; does anyone have the part numbers/replacements for those? Also, mine came WITHOUT the BIOS battery backup coin cells. I'm assuming they are just CR2032 cells, can someone confirm?
I have a Quanta one; midplane power board is P/N: DAF03TH16D0 (Rev D).
Mine came without disk trays. Does anyone have part numbers for them (or an alternative that can be used instead)?
May i know who was your sellers?I would also love to find some risers
I got mine from the Server Store. They list exactly what is included in their listing. Mine came with the 10Gb Mezzanine card, but no risersMay i know who was your sellers?
I just bought one from Esisoinc. Their pics show risers and disk trays. I hope i dont get burned.
Does anyone know P/N for the mezzamine 10gbe card?
Do you mind to share your midplane power board P/N, pleaseI got mine from the Server Store. They list exactly what is included in their listing. Mine came with the 10Gb Mezzanine card, but no risers
I got mine from the Server Store. They list exactly what is included in their listing. Mine came with the 10Gb Mezzanine card, but no risers
I just ordered my chassis from Esisoinc and they didn't mention if they had them available, just said they didn't come with them. There's a few available out there though. Check the bottom of this doc for part numbers: http://www.mellanox.com/related-docs/prod_adapter_cards/PB_ConnectX-3_EN_Card_OCP.pdfPlease share your 10gb P/N pls. Esisoinc will see if they can find me one and ship with my board.
I answered my own quesyion. I just tested and both ecc and non-ecc work.Has anyone tried non-ecc ddr3?
Yes, mine was from them too; I got the $199 version, which did not come with risers or disk trays. This wasn't surprising to me (despite the pic) because they sell a $299 version that explicitly says "W. Riser". I am a bit bummed about not having disk trays, however.May i know who was your sellers?
I just bought one from Esisoinc. Their pics show risers and disk trays. I hope i dont get burned."
They told me to give them P/N and they will find some .I just ordered my chassis from Esisoinc and they didn't mention if they had them available, just said they didn't come with them. There's a few available out there though. Check the bottom of this doc for part numbers: http://www.mellanox.com/related-docs/prod_adapter_cards/PB_ConnectX-3_EN_Card_OCP.pdf
To clarify... you bought from Peter (pdneiman) correct?Yes, mine was from them too; I got the $199 version, which did not come with risers or disk trays. This wasn't surprising to me (despite the pic) because they sell a $299 version that explicitly says "W. Riser". I am a bit bummed about not having disk trays, however.
Edit: Actually, seems I am confusing pdneiman's listings with esisoinc. pdneiman has the listing that says "W. Riser". I wasn't expecting it anyway. I did get the 10 Gb boards, however, so I'm happy.
No, sorry, I bought the $199 version from esioinc and received:To clarify... you bought from Peter (pdneiman) correct?
Cause i absolutely need risers,
No, sorry, I bought the $199 version from esioinc and received:
I meant to say that pdneiman is the one with the separate (more expensive) listing for $299 that specifically says "With Riser".
- No risers
- DID receive 10 GbE mezzanine
- No disk trays
- No air shroud
- No mobo BIOS battery (although this was probably someone being overzealous when stripping the memory and CPUs)
I ordered but it hasn't arrived yet. I asked before purchasing as I definitely needed the riser and the response I received said it was included.Anyone else bought from esisoinc?
This is not acceptable, their pics clearly show riser.
I ordered two from esisonic, separately a week apart. The first one I got did not have HDD trays, had the mezzanine card, and no shrouds. It also had a power cable with Tyco Mate-N-Lok power connector on both ends. for the 200-277VAC input (which is pretty useless) as well as second Tyco Mate-N-Lok power cable for the 48V DC. The second one I ordered I got OBO at $190, this one had HDD trays, a riser card with 10G card, and a regular C14 power cable with no DC cable. It looks to me like they are a mixed bag, and your best bet would be to make an offer, and then ask for a specific configuration.Anyone else bought from esisoinc?
This is not acceptable, their pics clearly show riser.
I have a quanta with the 10Gb Mezzanine card. The computer definitely wants to PXE to the 10Gb. I'm not even sure that it will PXE the 1GB link.
Wow.... unbelievable so they dont bother test any of them as well.I ordered two from esisonic, separately a week apart. The first one I got did not have HDD trays, had the mezzanine card, and no shrouds. It also had a power cable with Tyco Mate-N-Lok power connector on both ends. for the 200-277VAC input (which is pretty useless) as well as second Tyco Mate-N-Lok power cable for the 48V DC. The second one I ordered I got OBO at $190, this one had HDD trays, a riser card with 10G card, and a regular C14 power cable with no DC cable. It looks to me like they are a mixed bag, and your best bet would be to make an offer, and then ask for a specific configuration.