Perc H710 Mini to IT mode

Dave Corder

Active Member
Dec 21, 2015
205
113
43
40
Hey @fohdeesha, do you happen to know how to program the board name? I have a 9206-16e that is now coming up as a SAS9207-8i after doing a -e 6 erase and re-flash. Is that a function of the firmware image, or something that can be set via lsiutil or something? Not a big deal, but I'd like to fix it if possible.
 

fohdeesha

Kaini Industries
Nov 20, 2016
2,618
2,814
113
32
fohdeesha.com
Hey @fohdeesha, do you happen to know how to program the board name? I have a 9206-16e that is now coming up as a SAS9207-8i after doing a -e 6 erase and re-flash. Is that a function of the firmware image, or something that can be set via lsiutil or something? Not a big deal, but I'd like to fix it if possible.
as I think you figured out in your other thread, it's tied to what firmware image you flash. if you want it to enumerate as a 9206-16e, you'll need to flash the 9206-16e image
 
  • Like
Reactions: Sleyk and amp88

robot468

New Member
Jul 2, 2022
2
1
1
Hello. @fohdeesha, Thank you so much for the firmware for H710 - it greatly helps me.
Maybe you know, is there same order of disks in which they are provided to the system? For me it seems completely random.
I have 2 SSD in rear r720xd slots, and 4 HDD in front slots. My system detects it in oder:
ssd1
hdd3
ssd2
hdd2
hdd4
hdd1

UPD: I found this about mapping(in attach). Is it relevant for this firmware?
 

Attachments

Last edited:

Jainesh

New Member
May 23, 2019
1
0
1
Hi Everyone,
I recently got R720XD with PERC H310 Mini/Mono. I am using non-dell drives, so it shows up as a blocked state. These drives were 520 Bytes, and have been formatted as 512 Bytes.

I need to use the rear drives as RAID1 while keeping the other drive as JBOD.

So IT mode won't work for me. Is it possible to change PERC H310 into LSI IR Firmware? Can this be added to the script? Or if someone has an ISO I can use to get this flashed that way?