Good day.
I bought recently a LSI SAS 9300 16i. I bought it because was sealed in the original box. I know that the 9305 would be better. But I couldn't find it in a unopened box to make sure was legit.
I have downloaded from broadcom:
Tried the same for the controller Nº2 with same results.
Now I try to install ROM, or the new fw, and says I need the fw. I write the fw name and gives this error:
I should have been here before trying this myself.
I hope I didn't ruined the card.
Can anyone help me, please?
Thank you
I bought recently a LSI SAS 9300 16i. I bought it because was sealed in the original box. I know that the 9305 would be better. But I couldn't find it in a unopened box to make sure was legit.
I have downloaded from broadcom:
- 9300_16i_Package_P16_IT_FW_BIOS_for_MSDOS_Windows
- 9300_16i_Package_P16_IT_FW_BIOS_for_MSDOS_Windows\Firmware\SAS9300_16i_IT\SAS9300_16i_IT.bin
- 9300_16i_Package_P16_IT_FW_BIOS_for_MSDOS_Windows\sasbios_rel\mptsas3.rom
- 9300_16i_Package_P16_IT_FW_BIOS_for_MSDOS_Windows\uefi_bsd_rel\Signed\mpt3x64.rom
- Installer_P16_for_UEFI
- Installer_P16_for_UEFI\sas3flash_udk_uefi_x64_rel\sas3flash.efi
- sas3flash.efi -listall
- sas3flash.efi -c 0 -list
- sas3flash.efi -c 1 -list
- sas3flash.efi -c 0 -o -e 7
- sas3flash.efi -c 0 -o -f SAS9300_16i_IT.bin -b mpt3x64.rom -b mptsas3.rom
Tried the same for the controller Nº2 with same results.
Now I try to install ROM, or the new fw, and says I need the fw. I write the fw name and gives this error:
I should have been here before trying this myself.
I hope I didn't ruined the card.
Can anyone help me, please?
Thank you
Last edited: