I am struggling with configuring the VDX 7640 so that I don't have to plug an RJ45 cable into the management port, but instead be able to Telnet/SSH from anywhere to access the management console. Like some of the Cisco and Dell switches
I tried following this on Reddit, but didn't work for me.
https://www.reddit.com/r/Brocade/comments/jarrhh
Also tried to configure a vrf (mgmt-vrf)
Management VRF
if anyone can share some light as how to configure the management console be able to access it from anywhere, that'll be great.
I tried following this on Reddit, but didn't work for me.
https://www.reddit.com/r/Brocade/comments/jarrhh
# Create Vlan interface Vlan 124 # Create Ve inside rbridge-1 rbridge-id 1 interface Ve 124 ip proxy-arp ip address 192.168.1.1/24 no shutdown # ADD VLAN 124 to a trunk port interface TenGigabitEthernet 1/0/15 switchport switchport mode trunk switchport trunk allowed vlan add 124 switchport trunk tag native-vlan spanning-tree shutdown fabric isl enable fabric trunk enable no shutdown |
Also tried to configure a vrf (mgmt-vrf)
Management VRF
if anyone can share some light as how to configure the management console be able to access it from anywhere, that'll be great.
Last edited: