Hello All,
I'm looking for any suggestions as this is my first build and I'm so close...yet so far
I have a Dell 7920 Tower, where I'm trying to install:
2x Xeon 8173M
12 x 64GB Hynix 4DRx4 HMAA8GL7AMR4N-VK 2666mhz ECC sticks
4x 2TB Samsung 970 Evo Plus (via an Asus Hyper m2 card).
I'm able to get into the bios and see the 2 CPUs, all of my drives and so far 4 of the sticks if placed in DIMM slots 1 & 2 for each CPU.
Here is my problem: If I put in any more sticks the computer does nothing when I turn it on. It powers up but I have nothing on video. The power button doesn't display any codes either.
I've tried swapping the sticks into the known working DIMM slots and it works.
Any suggestions would be greatly appreciated. Unsure if there is a bios setting that I'm missing.
Thank you
I'm looking for any suggestions as this is my first build and I'm so close...yet so far
I have a Dell 7920 Tower, where I'm trying to install:
2x Xeon 8173M
12 x 64GB Hynix 4DRx4 HMAA8GL7AMR4N-VK 2666mhz ECC sticks
4x 2TB Samsung 970 Evo Plus (via an Asus Hyper m2 card).
I'm able to get into the bios and see the 2 CPUs, all of my drives and so far 4 of the sticks if placed in DIMM slots 1 & 2 for each CPU.
Here is my problem: If I put in any more sticks the computer does nothing when I turn it on. It powers up but I have nothing on video. The power button doesn't display any codes either.
I've tried swapping the sticks into the known working DIMM slots and it works.
Any suggestions would be greatly appreciated. Unsure if there is a bios setting that I'm missing.
Thank you
Last edited: