LSI RAID Controller and HBA Complete Listing Plus OEM Models

Discussion in 'RAID Controllers and Host Bus Adapters' started by mobilenvidia, Apr 19, 2012.

  1. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Below is a list of all known LSI SAS devices from the SAS1068 chipset to the very latest not yet publicly available SAS3xxx series.
    Devices with links have been released and official website technical info/support.
    Quite a few devices with no links are devices that may have been going to be released, are going to be released or just devices that never made it to production, but they are listed all the same.
    I have where applicable written which devices are cross flashable to other devices of the same chipset.
    If you have a controller and have successfully cross flashed or done something worthy, reply back here and the list will be updated.
    If you find mistakes reply back.
    If you know of other devices that we've missed reply back
    If you find official webpages for devices listed but not linked reply back.

    Key
    4i = 1x internal 4 port SAS connector (SFF-8087)
    8i = 2x internal 4 port SAS connectors (SFF-8087)
    8e= 2x external 4 port SAS connector (SFF-8088)
    24i4e = 6x internal 4 port SAS connector (SFF-8087) AND 1x external 4 port SAS connector (SFF-8088)
    There are other combinations, but you get the idea :)
    Some devices have SATA ports, ie a 4i device could mean 4x SATA connectors (these are rare)

    Some devices have quite a few options when it comes to BBU's, these are optional extras, check website specs for options.

    Some OEM devices look cheaper then their LSI counterparts (ie IBM ServeRAID M1015 vs LSI9240) this is due to the M1015 lacking RAID 5/50 and drive encryption.
    IBM has a 'Advanced feature key' to enable the missing functions, these need to be purchased separately.
    Be warned that the Software keys are NOT interchangeable between OEMs and LSI !!

    Hope this is of use.

    Older SAS controllers

    LSI1064 - 4x SAS 1.0 = 973MB/s, PCIe v1.0 4x, 858MB/s max throughput
    LSI1068 - 8x SAS 1.0 = 1945MB/s, PCIe v1.0 4x, 858MB/s max throughput
    LSI1078 - DDR2 667Mhz, 8x SAS 1.0 = 1945MB/s, PCIe v1.0 4x, 858MB/s max throughput

    LSI MegaRAID
    SAS1068
    • LSI Logic MegaRAID SAS 8408E RAID Controller
    • LSI Logic MegaRAID SAS 8480E RAID Controller
    • LSI Logic MegaRAID SAS 8344ELP RAID Controller
    • LSI Logic MegaRAID SAS 8308ELP RAID Controller
    • LSI Logic MegaRAID SATA 300-4ELP RAID Controller
    • LSI Logic MegaRAID SATA 300-12E RAID Controller
    • LSI Logic MegaRAID SATA 300-16E RAID Controller
    • LSI Logic MegaRAID SAS 84016E RAID Controller
    • LSI Logic MegaRAID SATA 300-8ELP RAID Controller
    • LSI Logic MegaRAID SAS 8300XLP RAID Controller
    SAS1068e, e=PCIe, x = PCI-X, 3Gbps HBA controller chipset
    • LSI SAS 3081E-R 2x4 port internal SAS horizontal RAID 0, 1, 1E and 10E, no cache, no BBU
    • LSI SAS 3801E 2x4 port external, no cache, no BBU
    • LSI SAS 3442E-R 1x4 port internal SAS horizontal RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, internal SFF8484, external SFF8470 ports
    • LSI SAS 3041E-R 4x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU
    • LSI SAS 3080X-R 8x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, PCI-X interface
    • LSI SAS 3801X 2x4 port external, no cache, no BBU,RAID 0, 1, 1E, 10E and no RAID, PCI-X interface
    • LSI SAS 3442X-R 1x4 port internal SAS horizontal RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, internal, SFF8484, external SFF8470 ports
    • LSI SAS 3041X-R 4x1 port internal SATA vertical RAID 0, 1, 1E, 10E and no RAID, no cache, no BBU, PCI-X interface
    • LSI SAS 31601E 4x4 port external, no cache, no BBU, RAID 0, 1, 1E, 10E and no RAID, dual LSI1068 controllers
    SAS1078Dell PercRAID
    sas1078
    • Perc 6/E 2x 4 wide port External SAS, RAID 0, 1, 5, 6, 10, 50, 60, 256MB or 512MB DDR II cache, BBU capable
    • Perc 6/i Adaptor 2x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, No cache or 256MB DDR II cache, BBU capable
    • Perc 6/i Integrated 2x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, 256MB DDR II cache, BBU capable
    • Cerc 6i integrated 1x 4 wide port inernal SAS, RAID 0, 1, 5, 6, 10, 50, 60, No cache, No BBU
    IBM ServeRAID

    SAS1078SAS1068eFujitsu
    sas1068e
    • S26361-F3271-E201 1x4 port internal, 1x4 port external, LSI SAS3442E-R
    SAS1078
    • RAID 5/6 SAS based on LSI MegaRAID (MegaRAID SAS 8708ELP)
    • S26361-F3257-E256 2x4 port internal, 256MB BBU capable
    • S26361-F3257-E512 2x4 port internal, 512MB BBU capable
    • S26361-F3890-E201 2x 4port external no BBU, MegaRAID SAS 8880E
    • S26361-F3890-E230 2x4 port external with BBU, MegaRAID SAS 8880E
    HP Smart Array
    sas1078
    • HP Smart Array P400 2x 4port internal SAS (SFF8484) vertical, 256MB or 512MB DDRII BBWC, RAID 0, 1, 10, 5 and optional 6 (with BBWC)
    • HP Smart Array P800 2x 4port internal and 2x 4 port external SAS, 512MB DDRII BBWC, RAID 0, 1, 10, 5 and 6 (with BBWC)
    Intel
    SAS1068 with Intel 80333 IOPSAS1068e HBA controllersSAS1078Tyan Adapters
    SAS1068ESAS1078
    • Tyan P3214 (P3214EHR) 1x 4port internal SAS vertical, low profile, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, (50, 60 with expander ?)
    • Tyan P3218 (P3218EHR) 2x 4port internal SAS vertical, low profile, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60
    • Tyan P3219 (P3219EHRX) 2x 4port internal horizontal and 2x 4port external SAS, 512MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60
    • Tyan P3228 (P3228EHR) 4x 4 port internal SAS horizontal, full height, 256MB 667Mhz DDRII Cache, RAID 0, 1, 5, 6, 10, 50, 60
    Tyan Motherboards
    SAS1068ESuperMicro Adapters
    SAS1068E
    • AOC-USAS-L4i 1x 4port internal and 1x 4port external SAS, full height, no BBU, RAID 0, 1 and 10
    • AOC-USAS-L4iR 1x 4port internal and 1x 4port external SAS, full height, no BBU, RAID 0, 1, 10 and 5 (with i button)
    • AOC-USAS-L8i 2x 4port internal SAS horizontal, full height, no BBU, RAID 0, 1 and 1E also IT mode available
    • AOC-USASLP-L8i 2x 4port internal SAS horizontal, low profile, no BBU, RAID 0, 1 and 10
    SAS1078
    • AOC-USAS-H8iR 2x 4port internal SAS horizontal, full height, 256MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)
    • AOC-USAS-H4iR 1x 4port internal and 1x 4port external SAS, full height, 256MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)
    • AOC-USASLP-H8iR 2x 4port internal SAS horizontal, low profile, 512MB DDRII cache, BBU capable, RAID 0, 1, 5, 6, 10, 50, 60 (with ibutton)
    SuperMicro Motherboards
    SAS1068E
    • X8DT3-LN4F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DT3-F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DT3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DA3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DTL-3F 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DTL-3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    • X8DAL-3 2x4 ports SAS internal, RAID 0, 1, and 10, no cache, no BBU, (Optional: AOC-IButton68) RAID 5 support
    Misc Adapters, these are unkown controllers
    • MS-91F2 RAID Controller
    • MS-3035 RAID Controller
    • Intel® Integrated RAID Controller SROMBSASFC
    • Intel® Integrated RAID Controller SROMBSASMP2
    • Intel® Integrated RAID Controller SROMBSASMR
    • Intel® RAID Controller SROMBSASBN
    • LSI Logic MegaRAID SAS PCI Express ROMB
    • LSI MRSASRoMB-8i
    • LSI MegaRAID SAS 2002 ROMB
    • LSI MegaRAID SAS Adapter
    • LSI MegaRAID SAS PCI Express ROMB
    • PY SAS RAID Mezz Card 6Gb 512MB
    • SMC1078
    • SMC2208
     
    #1
    Last edited: Jun 3, 2012
    Jany.Z, darkplayer, Stux and 3 others like this.
  2. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS2008 based controllers

    SAS2008 - 8x SAS v2.0, 3890MB/s, PCIe v2.0, PCIe 4x slot 1716MB/s, PCIe 8x slot 3433MB/s max throughput

    INTEGRATED RAID FEATURES
    • Supported RAID levels RAID 0, 1, 1E and 10
    • Two volumes supported per controller
    • 12 Integrated RAID drives supported per controller
    • Two hot spares per controller
    • Single virtual drive presented to the OS per IR volume
    • Ability to boot from aIR volume
    • Supports SAS and SATA drives
    • Drives ia volume must be the same type
    • > 2 TB array support for R0, 1E, 10
    • RAID 1 Online capacity expansion
    • Consistency check
    • Allows import of volumes created on LSI’s first generatioSAS controllers and maintains legacy data layouts
    • High reliability and data integrity
    • Non-volatile write journaling
    • Physical disks not volatile to OS or to application software
    • Hot swap capability
    • Disk Data Format (DDF) compliant
    • S.M.A.R.T. support
    • Enclosure Management
    • LED via SGPIO
    • Additional connectivity such as tape, JBOD or external storage
    • High performance
    • Low host CPU and PCI bus utilization
    • Ease of use Simple configuration utility
    • No special drivers required
    • Fusion-MPT™ architected
    • Memory Requirements
    • 4MB flash part for IR code
    • 2KB NVSRAM for write journaling and other read/write persistent data
    LSI MegaRAID and SAS (HBA)
    • LSI SAS 9200-8e 2x4 ports SAS external, no cache, no BBU, IT mode only firmware, might be cross flashable to a LSI9240
    • LSI SAS 9201-16i 4x4 ports SAS internal horizontal, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports
    • LSI SAS 9201-16e 4x4 ports SAS external, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports
    • LSI SAS 9201-8i 2x4 port SAS internal horizontal, no cache, no BBU, possibly no NVRAM so IR mode may not work (IT only)
    • LSI SAS 9202-16e 4x4 ports SAS external, no cache, no BBU might be cross flashable to a LSI9240 but with 16 ports, this is a dual SAS2008 card with PCIe 16x interface !!
    • LSI SAS 9210-8i 2x4 port internal SAS horizontal, no cache, no BBU, OEM version of LSI9211-8i, , can flashed to IT or IR mode possibly even to LSI9240
    • LSI SAS 9211-4i 1x4 port internal SAS horizontal, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
    • LSI SAS 9211-8i 2x4 port internal SAS horizontal, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
    • LSI SAS 9212-4i4e 4x1 port internal vertical SATA ports and 1x4 Port external SAS, no cache, no BBU, can flashed to IT or IR mode possibly even to LSI9240
    • LSI MegaRAID SAS 9240-4i 1x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10 and 5, can be crossflashed to LSI9211 IT/IR
    • LSI MegaRAID SAS 9240-8i 2x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10, 5 and 50, can be crossflashed to LSI9211 IT/IR
    • LSI MegaRAID SAS 9241-4i
    • LSI MegaRAID SAS 9241-8i
    IBM ServeRAID
    • ServeRAID M1015 SAS/SATA Controller 2x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1 and 10 can be cross flashed to LSI9211 IT/IR mode also to LSI9240 but does not enable RAID5
    • ServeRAID M1115 SAS/SATA Controller 2x4 port internal SAS vertical, no cache, no BBU, RAID 0, 1 and 10 can be cross flashed not tested yet.
    • ServeRAID H1110 Conroller 1x4 port internal SAS horizontal,no cache, no BBU, RAID 0, 1 and 10 can be cross flashed not tested yet.
    • IBM 6Gb SAS HBA 1x4 port external SAS, 4x SATA ports vertical, LSI9212 in IT more, no cache no RAID, should be flashable to IR mode
    • IBM 6Gb SAS Performance optimized HBA 2x4 port SAS vertical, this is the M1015 but flashed to IT mode should be able to flash to anything the M1015 can., no cache no RAID
    Dell Perc RAID
    • Dell 6Gbps SAS HBA 2x4 port internal SAS Horizontal, no cache, no BBU, Passthrough only, similar to LSI9211 IT mode
    • Dell PERC H200 Adapter 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
    • Dell PERC H200 Integrated 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
    • Dell PERC H200 Modular
    • Dell PERC H200 Embedded
    • Dell PERC H200 2x4 port internal SAS Horizontal, no cache, no BBU, RAID 0, 1 and 10, similar to LSI9211 IR mode
    • Dell Internal Tape Adapter
    • PERC H310
    • PERC H310 Adapter 2x4 port internal SAS vertical ?, no cache, no BBU, RAID 0, 1, 10, 5 and 50 should be able to cross flash to LSI9211 IT/IR and LSI9240, NOT tested
    • PERC H310 Integrated
    • PERC H310 Mini
    • PERC H310 Embedded
    Fujitsu
    • RAID Ctrl SAS 6G 0/1 (D2607) 2x4 port SAS horizontal, no cache, no BBU, should be able to be cross flashed to LSI9211 IT/IR mode, RAID 0,1 and 10
    Supermicro
    • Supermicro SMC2008 Embedded on motherboard
    Cisco
    • Cisco UCSC RAID SAS 2008M-8i
    Intel
    Tyan Motherboards
    Supermicro Motherboards
    • X8DTH-6F 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    • X8DTH-6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    • X8DT6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    • X8DA6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    • X8DTL-6F 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    • X8DTL-6 2x4 port internal SAS, no cache, no BBU, RAID 0, 1 and 10,Optional: AOC-SAS2-RAID5-KEY for RAID 5
    Gigabyte Motherboards
    • GA-7PESH3 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
    • GA-7PESH2 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
    • GA-7PESH1 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
    • GA-7PESLX 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
    • GA-7PPSH 2x4 port internal SAS, vertical, no cache, no BBU, RAID ?
    ASUS PIKE
    • ASUS PIKE 2008 8-port SAS2 6G RAID card
    • ASUS PIKE 2008/IMR 8-port SAS2 6G RAID card
     
    #2
    Last edited: Nov 20, 2013
    Stux, TheBloke and Kai Amundsen like this.
  3. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS2108 based controllers

    SAS2108 - DDR2 800Mhz, 8xSAS v2.0 3890MB/s, PCIe v2.0, PCIe 4x slot 1716MB/s, PCIe 8x slot 3433MB/s max throughput

    LSI MegaRAID
    • LSI MegaRAID SAS 9260-16i 4x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9260-4i 1x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6 and 50
    • LSI MegaRAID SAS 9260-4ix
    • LSI MegaRAID SAS 9260-8i 2x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9260-8ix
    • LSI MegaRAID SAS 9260CV-4i 1x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5 and 50 with CacheVault
    • LSI MegaRAID SAS 9260CV-8i 2x4 port internal SAS vertical, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60 with CacheVault
    • LSI MegaRAID SAS 9261-8i 2x4 port internal SAS horizontal, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9262-8i
    • LSI MegaRAID SAS 9264-8i
    • LSI MegaRAID SAS 9280-16i4e 4x4 ports internal SAS vertical, 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9280-24i4e 6x4 ports internal SAS and 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9280-4i4e 1x4 ports internal SAS vertical and 1x4 ports SAS external, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9280-8e 2x4 ports external SAS, 512MB DDR2 cache, BBU capable RAID 0, 1, 10, 5, 6, 50 and 60
    • LSI MegaRAID SAS 9280-8ex
    • LSI MegaRAID SAS 9280CV-4i4e
    • LSI MegaRAID SAS 9280CV-8e
    • LSI MegaRAID SAS 9281-8E
    • LSI MegaRAID SAS 9282-8e
    IBM ServeRAID
    • ServeRAID M5014 SAS/SATA Controller 2x4 port internal SAS vertical, 256MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9260, need Advanced feature key for RAID 6 and 60 and Drive encryption
    • ServeRAID M5015 SAS/SATA Controller 2x4 port internal SAS vertical 512MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9260, need Advanced feature key for RAID 6 and 60 and Drive encryption.
    • ServeRAID M5025 SAS/SATA Controller 2x4 port external SAS 512MB cache, RAID 0, 1, 10, 5 and 50, BBU capable, can be cross flashed to LSi9280, need Advanced feature key for RAID 6 and 60 and Drive encryption.
    Dell Perc RAID
    • PERC H700 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
    • PERC H700 Adapter 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
    • PERC H700 Integrated 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9260, Full height card
    • PERC H700 Modular
    • PERC H800 Proto Adapter
    • PERC H800 Adapter 2x4 ports internal SAS vertical, 512MB and 1GB DDr2 Non Volatile cache, RAID 0, 1, 10, 5, 6, 50, 60, can be cross flashed to LSI9280, Full height card
    Fujitsu

    • SAS RAID HDD Module (D2816)
    • SAS RAID HDD Module w/o cache (D2837)
    Intel

    SuperMicro

    • AOC-SAS2LP-H8IR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • AOC-SAS2LP-H8iR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • AOC-SAS2LP-H4iR 1x4 ports SAS internal, 1x4 ports SAS external, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60

    SuperMicro Motherboards
    • X8DTU-6F+-LR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • X8DTU-6TF+-LR 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • X8DTU-6F+ 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • X8DTU-6TF+ 2x4 ports SAS internal, 512MB DDR2 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    ASUS PIKE
    • ASUS PIKE 2108 8-port SAS2 6G RAID card
     
    #3
    Last edited: Dec 25, 2013
    Stux and TheBloke like this.
  4. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS2208 based Controllers

    LSI MegaRAID
    • LSI MegaRAID SAS 9265-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9265CV-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault
    • LSI MegaRAID SAS 9266-4i 1x4 ports SAS internal horizontal, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50
    • LSI MegaRAID SAS 9266-8i 2x4 ports SAS internal horizontal, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9267-8i
    • LSI MegaRAID SAS 9272-8i
    • LSI MegaRAID SAS 9285-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9285CV-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault
    • LSI MegaRAID SAS 9270-4i 1x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9270-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9270CV-8i 2x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault
    • LSI MegaRAID SAS 9271-4i 1x4 ports SAS internal vertical, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6
    • LSI MegaRAID SAS 9271-8i 2x4 ports SAS internal horizontal, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9271-8iCC 2x4 ports SAS internal horizontal, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60, Comes with CacheCade Pro v2 and Fastpath
    • LSI MegaRAID SAS 9286-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60
    • LSI MegaRAID SAS 9286CV-8e 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault
    • LSI MegaRAID SAS 9286CV-8eCC 2x4 ports SAS external, 1GB DDR3 cache, BBU capable, RAID 0, 1, 10, 5, 6, 50, 60 with CacheVault and CacheCade Pro v2 and Fastpath
    • Nytro MegaRAID NMR 8100-4i 1x4 port SAS internal, 1GB DDR3 cache with 100GB SLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID NMR 8110-4i 1x4 port SAS internal, 1GB DDR3 cache with 200GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID NMR 8110-4e 1x4 port SAS external, 1GB DDR3 cache with 200GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID NMR 8120-4i 1x4 port SAS internal, 1GB DDR3 cache with 800GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID NMR 8120-4e 1x4 port SAS external, 1GB DDR3 cache with 800GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID8115-8e8i 1x4 port SAS internal,1x4 port SAS external 1GB DDR3 cache with 400GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    • Nytro MegaRAID8140-8e8i 1x4 port SAS internal,1x4 port SAS external 1GB DDR3 cache with 1600GB eMLC, RAID 0, 1, 5, 6, 10, 50, 60
    IBM ServeRAID
    Dell Perc RAID
    • PERC H710 Adapter 2x4 ports internal SAS vertical ? , 512MB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60
    • PERC H710 Integrated
    • PERC H710 Mini
    • PERC H710 Embedded
    • PERC H710P Adapter 2x4 ports internal SAS vertical ? , 1GB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60
    • PERC H710P Integrated
    • PERC H710P Mini
    • PERC H810 Adapter 2x4 ports external SAS , 1GB DDR3 cache, RAID 0, 1, 10, 5, 6, 50, 60
    HP
    • HP H210i Host Bus Adapter 1x 4port
    Intel

    Supermicro
    • AOC-S2208L-H8IR 2x4 port SAS internal, 1GB DDR3 cache with BBU or NAND options, RAID 0, 1, 10, 5, 6, 50, 60
    Supermicro Motherboard
    • X9DRH-7F 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRH-7TF 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9QR7-TF+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DAX-7F 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DAX-7TF 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRFF-7+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRFF-7G+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRFF-7T+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRFF-7TG+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRW-7TPF 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • X9DRW-7TPF+ 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • H8QG7+-LN4F 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    • H8QG7-LN4F 2x 4 port internal SAS horizontal, RAID 0, 1, 10, 5, 6, 50, 60, 1GB cache
    ASUS PIKE
    • ASUS PIKE 2208 8-port SAS 6G HW RAID card
     
    #4
    Last edited: Feb 23, 2014
    JanCerny, TheBloke and BigXor like this.
  5. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS2308 based Controllers

    FEATURES
    • Integrated RAID – RAID Levels 0, 1, 1E, and 10
    • Integrated MegaRAID® support available upon request
    • High Performance IOP
    • PowerPC 440 @ 800MHz
    • 6Gb/s SAS Interface
    • 8 port SAS/SATA controller
    • Supports 1.5Gb/s, 3Gb/s, and 6Gb/s SAS and SATA data transfer rates
    • Spread spectrum clocking
    • Supports SSP, SMP, STP and SATA protocols
    • SAS and SATA device support
    • Supports narrow and wide ports
    • T-10 data protection model
    • Optical Support and Advanced Error Reporting (AER)
    • PCI Express hot plug support
    • Supports up to 1,000 devices
    • PCI Express 3.0 Interface
    • Supports x8, x4, x1 PCIe lanes at a transfer rate up to 8.0 GT/s per lane, full duplex
    • Lane and polarity reversal
    • SR-IOV (16 virtual functions)
    • Supports End-to-End CRC (ECRC) and Advanced Error Reporting (AER)
    • PCI Express hot plug support
    • Advanced Power Management support
    • Slumber and Partial power mode support for SAS and SATA devices
    • Programmable SAS link power down
    • Variable PCIe bandwidth negotiation
    • External memory interface support
    • Flash ROM
    • NVSRAM for Integrated Mirroring
    • Communication Interfaces
    • I2C interfaces for enclosure management services
    • UART and Ethernet interface for debug
    • SFF-8485 Compliant, SGPIO
    • JTAG support
    • 837 FPBGA-HP (25mm)
    LSI MegaRAID
    • LSI SAS 9205-8e 2x4 ports SAS external, no cache, no BBU, can be flashed to either IT or IR mode, possibly even to LSI9240 making it a dual core version (LSI 9245 which was planned)
    • LSI SAS 9206-16e 4x4 ports SAS external, no cache, no BBU, can be flashed to either IT or IR, Dual SAS2308 controllers on the card !!
    • LSI SAS 9207-4i4e 1x4 port internal horizontal, 1x4 port external SAS, no cache, no BBU, comes in IT mode, should be crossflashable to IR mode, possibly even to LSI9240
    • LSI SAS 9207-8i 2x4 port horizontal SAS, no cache, no BBU, no cache, no BBU, comes in IT mode, should be crossflashable to IR mode, possibly even to LSI9240
    • LSI SAS 9207-8e, LSI SAS 9207-8e, 2x4 port external SAS, no cache, no BBU, comes in IT mode, should be crossflashable to IR mode, possibly even to LSI9240
    • LSI SAS 9217-4i4e 1x4 port external SAS, no cache, no BBU, OEM version of 9207-4i4e, comes in IR mode, should be crossflashable to IT mode, possibly even to LSI9240
    • LSI SAS 9217-8i 2x4 port horizontal SAS, no cache, no BBU, no cache, OEM version of 9207-8i in IR mode, should be crossflashable to IT mode, possibly even to LSI9240
    Intel
    HP
    • HP H220 Host Bus Adapter
    • HP H221 Host Bus Adapter
    • HP H222 Host Bus Adapter
    • HP H220i Host Bus Adapter
    IBM ServeRAID
    • N2115 SAS/SATA HBA N2115 SAS/SATA HBA 2x4 port SAS internal vertical, Non-RAID (JBOD mode), no cache, no BBU, optimized for SSD
    • N2125 SAS/SATA HBA N2125 SAS/SATA HBA 2x4 port SAS external 2x4, Non-RAID (JBOD mode), no cache, no BBU, optimized for SSD
    SuperMicro
    • AOC-S2308L-L8E - 2x 4 port SAS internal 2x4 vertical, JBOD (IT only), no BBU, SSD optimised
    Tyan Motherboards
    ASRock Motherboards

    Supermicro Motherboards
    • X9QR7-TF - 4x4 ports SAS internal, RAID 0, 1 and 10, no cache, no BBU
    • X9QR7-TF-JBOD - 4x4 ports SAS internal 2x4 ports SAS internal, JBOD, no cache, no BBU
    • X9DR7-LN4F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X9DR7-JLN4F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1, 10 and JBOD, no cache, no BBU
    • X9DRD-7LN4F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X9DRD-7JLN4F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, JBOD, no cache, no BBU
    • X9DA7 - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X9SRH-7F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X9SRH-7F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X9DRFF-7 - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
    • X10SL7-F - 2x 4 port SAS internal 2x4 ports SAS, RAID 0, 1 and 10, no cache, no BBU
     
    #5
    Last edited: Feb 23, 2014
    darkplayer and TheBloke like this.
  6. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS3008 based controllers

    LSI MegaRAID
    SAS3008 No cache, no BBU, PCIe 3.0, 12Gbs SAS
    • LSI SAS 9300-4i4e 1x4 HD ports SAS external, 1x4 HD ports SAS internal no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9300-8e 2x4 HD ports SAS external, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9300-16e 4x4 HD ports SAS external, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9301-16e 4x4 HD ports SAS external, no cache, no BBU, IR/IT mode only firmware, PCIe 16x
    • LSI SAS 9310-8i 2x4 HD ports SAS vertical internal, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9300-4i 1x4 HD ports SAS vertical internal, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9300-8i 2x4 HD ports SAS vertical internal, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9300-4i4e 1x4 HD ports internal, 1x4 HD ports SAS external, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9311-16i 4x4 HD ports SAS internal, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9311-8i 2x4 HD ports SAS horizontal internal, no cache, no BBU, IR/IT mode only firmware
    • LSI SAS 9311-4i 1x4 HD ports SAS horizontal internal, no cache, no BBU, IR/IT mode only firmware
    • LSI MegaRAID SAS 9340-8i 2x4 HD port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10, 5 and 50
    • LSI MegaRAID SAS 9340-4i 1x4 HD port internal SAS vertical, no cache, no BBU, RAID 0, 1, 10, 5 and 50
    • LSI MegaRAID SAS 9341-8i 2x4 HD port internal SAS horizontal, no cache, no BBU, RAID 0, 1, 10, 5 and 50
    • LSI MegaRAID SAS 9341-4i 1x4 HD port internal SAS horizontal, no cache, no BBU, RAID 0, 1, 10, 5 and 50
    Intel
    IBM ServeRAID
    • IBM N2215 SAS/SATA HBA 2x4 HD port internal SAS vertical, no cache, no BBU, JBOD (IT mode only), Optimised for SSDs
    SuperMicro
    • AOC-S3008L-L8i 2x4 HD port internal SAS horizontal, no cache, no BBU, RAID 0, 1 and 10
    • AOC-S3008L-L8e 2x4 HD port internal SAS horizontal, no cache, no BBU, HBA (IT Mode)
    ASRock Motherboards
    • Extreme11
     
    #6
    Last edited: Jan 22, 2014
    RobSam, Stux, TheBloke and 1 other person like this.
  7. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    SAS3108 based controllers

    LSI MegaRAID
    SAS3108 2GB 1866Mhz DDR3, PCIe 3.0, 12Gbs SAS, CacheVault
    • LSI MegaRAID SAS 9360-4i 2x4 HD port internal SAS vertical
    • LSI MegaRAID SAS 9360-8i 2x4 HD port internal SAS vertical
    • LSI MegaRAID SAS 9361-4i 2x4 HD port internal SAS horizontal
    • LSI MegaRAID SAS 9361-8i 2x4 HD port internal SAS horizontal
    • LSI MegaRAID SAS 9362-4i
    • LSI MegaRAID SAS 9380-8e 2x4 HD port external SAS horizontal
    • LSI MegaRAID SAS 9380-4i4e 1x4 HD ports internal, 1x4 HD ports SAS external
    IBM ServeRAID
    Intel
    SuperMicro
    • AOC-S3108L-H8iR 2x4 port internal SAS up to 2GB Cache Vault, RAID 0, 1, 5, 6, 10, 50 and 60
    SuperMicro Motherboards
    • X9DRW-CF31
    • X9DRW-CTF31
     
    #7
    Last edited: Jan 22, 2014
    TheBloke likes this.
  8. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Info:

    Caching mode for SAS1078, SAS2108, SAS2208, SAS3108 controllers:
    SAS1068, SAS2008, SAS2308 and (probably) SAS3008 have no cache hence the below does not apply

    Read mode
    The "Read mode" parameter can be used to influence cache behavior for read. A maximum of three options "No read ahead", "Read ahead" and "Adaptive" are available. No caching during read takes place in the case of "No read ahead". If a data block is requested, "Read ahead" causes further sequentially following data blocks to be already read from the hard disk to the cache of the controller just in case, and in the hope that they will be called for in subsequent requests. In the case of the "Adaptive" setting the controller itself attempts to determine whether a read-ahead makes sense or not.

    Write mode
    The setting options of the controller cache that control the handling of write requests are summarized under the term "Write mode". There are three options for setting the write cache: "Write-through", "Write-back" and "Always Write-back (independent of BBU state)". The "Write-through" option ensures that each write request from the controller is only reported back as completed when it has been acknowledged by the hard disk. With the "Write-back" and "Always Write-back" options the requests are cached in the controller cache and they are immediately acknowledged to the application as completed and only transferred to the hard disk later. This procedure enables optimal utilization of controller resources, faster succession of the write requests and therefore higher throughput. Any power failures can be bridged by means of an optional BBU, thus guaranteeing the integrity of the data in the controller cache. The "Always Write-back" option enables the write cache on a permanent basis; it is also used if the battery of the BBU is empty or if no BBU is installed, whereas the "Write-back" option automatically switches to "Write-through" as long as the controller cache is not battery-buffered.

    Cache mode
    The "Cache mode" parameter, sometimes also referred to as "I/O Cache", influences the behavior of the controller cache during read. The "Direct" option defines that the data to be read is read from the hard disk directly and is also not stored in the controller cache. The alternative "Cached" causes an attempt to first be made to find the data in the controller cache and to satisfy the read request in such a way that the hard disk is accessed beforehand. All the data here is written to the controller cache so as to be available for subsequent read requests.
    Disk cache mode
    The possible values here are "enabled" and "disabled". In most cases, the enabling of the hard disk cache entails an increase in throughput for write access. If the system is safeguarded by UPS, the enabling of the hard disk cache is recommended for performance reasons.
     
    #8
    Last edited: Apr 28, 2012
    Stux and Kristian like this.
  9. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Batteries

    MegaRAID LSIiBBU07
    The MegaRAID LSIiBBU07, used with the 8880EM2, 9750 Series, 9260 Series and 9280 Series protects the integrity of the cached data by providing backup power if there is a complete AC power failure or a brief power outage. RoHS-6
    * Requires part LSI00260 when used with 9750 and 9280 16i4e/ 24i4e controllers.
    In the Box: MegaRAID LSIiBBU07, installation guide

    MegaRAID LSIiBBU08
    The LSIiBBU08, used with the MegaRAID SAS 9260 and 9280 series controllers, provides higher ambient temperature tolerances and increased serviceability while protecting the integrity of cached data in the event of a power or server failure.
    *Requires part LSI00260 for use with 9260-4i/8i controllers for remote attachment
    In the Box: LSIiBBU08 battery backup unit, remote cable
    Part #: LSI00264

    MegaRAID LSIiBBU09
    For MegaRAID SAS 9265 and 9285 Series Controllers
    In the Box:
    MegaRAID LSIiBBU09, remote cable
    Part #: LSI00279

    Expanders

    IBM ServeRAID Expansion Adapter 60Y0309
    Intel RAID Expander RES2SV240NC 16-20 port
    Intel® RAID Expander RES2CV240 24 port
    Intel® RAID Expander RES2CV360 36 port
    Intel® RAID Expander RES2SV240 24 port
    Hp 24 bay PCi-e SAS Expander SA P410
    Chenbro CK22803 28port
    Chenbro CK23601 36port

    Software/Hardware Feature Keys

    ServeRAID M5000 Series Advance Feature Key 46M0930
    ServeRAID M5000 Series Performance Accelerator Key 81Y4426

    Alternate LSI SAS2xxx based controllers.

    Areca, a very good range of controllers, including up to 4GB of cache, they make their own Firmware, not compatible with LSI MegaRAID.
    3ware, now owned by LSI, these controllers have their own firmware, not compatable with LSI's own MegaRAID range.
     
    #9
    Last edited: Nov 5, 2012
    Stux and Kristian like this.
  10. dba

    dba Moderator

    Joined:
    Feb 20, 2012
    Messages:
    1,478
    Likes Received:
    177
    Very nice update!!
     
    #10
  11. Patrick

    Patrick Administrator
    Staff Member

    Joined:
    Dec 21, 2010
    Messages:
    11,156
    Likes Received:
    4,114
    #11
  12. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Added some Fujitsu controllers
    Added Caching info
    Added Basic specs to controllers
    Numerous other changes

    Discovered that some unreleased LSI cards are OEM only versions ie LSI MegaRAID SAS 9286CV-8e are used by Fujitsu
     
    #12
  13. Patrick

    Patrick Administrator
    Staff Member

    Joined:
    Dec 21, 2010
    Messages:
    11,156
    Likes Received:
    4,114
    I added the 3ware SAS 9750-8i 2x Internal SFF-8087 ports. 512MB DDR2 cache BBU, capable of RAID 0, 1, 01, 5, 6, 50 to the main site 2108 listing. 3ware is an LSI company now but they do have some alternative parts and a following.
     
    #13
  14. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Possibly should have separate sections for 3ware and Areca, as they are LSI based and 3ware owned but they are not inter-operable.
    ie you can't cross flash, any RAID arrays on setup will probably not be imported by any other controller unlike the whole LSI range

    I wonder if the 3ware brand will stay ?
    LSI I think bought it to gain access to the PC440 ROC, AMCC owned 3ware and the PC440
     
    #14
  15. Patrick

    Patrick Administrator
    Staff Member

    Joined:
    Dec 21, 2010
    Messages:
    11,156
    Likes Received:
    4,114
    Great point. Maybe that becomes another page (but probably not too useful.)
     
    #15
  16. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    We could combine Areca and 3Ware controllers.
    But like you said not much point as you could just go to their respective website and do the same thing

    I'm fairly happy with the above now.
    Just need some experiences of who has done what with which and why.

    We need computurd to come over a have look, he's more in the know with Areca and if you can import/export Arrays from LSI
     
    #16
  17. Patrick

    Patrick Administrator
    Staff Member

    Joined:
    Dec 21, 2010
    Messages:
    11,156
    Likes Received:
    4,114
    Good point. Will see if I can track him down.
     
    #17
  18. Jeggs101

    Jeggs101 Well-Known Member

    Joined:
    Dec 29, 2010
    Messages:
    1,412
    Likes Received:
    200
    Pieter and Patrick --- good job on this and the main page posts. great resource for all of us less knowledgeable.
     
    #18
  19. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Added SAS expanders
    Added Feature keys
    Added Dell Perc 6 series

    Well started to, will expand as I find them or you guys find them (hint, hint)
     
    #19
    Last edited: Apr 28, 2012
  20. mobilenvidia

    mobilenvidia Moderator

    Joined:
    Sep 25, 2011
    Messages:
    1,745
    Likes Received:
    40
    Added HP Smart Array P400 and P800
    Added new Supermicro X9HDR mobo's
     
    #20
Similar Threads: RAID Controller
Forum Title Date
RAID Controllers and Host Bus Adapters Recommended (current) RAID controller for both PCI-E 2 and 3 ESXi hosts with SAS and SATA SSDs Sep 17, 2018
RAID Controllers and Host Bus Adapters Addressing problem configuration and need assistance selecting new RAID Controller & Expander… May 11, 2018
RAID Controllers and Host Bus Adapters Anyone ever used the new highpoint SSD7110 nvme raid controller? Jan 22, 2018
RAID Controllers and Host Bus Adapters Help me benchmark some MegaRAID controllers... Jan 12, 2018
RAID Controllers and Host Bus Adapters Supermicro drive limit on oboard LSI Raid controllers. Oct 21, 2017

Share This Page