Lenovo Thinkcentre/ThinkStation Tiny (Project TinyMiniMicro) Reference Thread
- Thread starter Parallax
- Start date
-
- Tags
- lenovo tiny tinyminimicro
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Yep, says it has " Windows 10 IoT Enterprise 64 ". Googling .... says I need to have an IOT account just to DL the IOT ISO ....
Anyone have experience with this? Does the IOT license on my device then NOT work with regular windows 10?
Anyone have experience with this? Does the IOT license on my device then NOT work with regular windows 10?
Where i can download Windows 10 IoT Enterprise LTSC 2019 - Microsoft Q&A
Hello, where i can find .iso file of Windows 10 IoT Enterprise LTSC 2019 on web page? Only newest version 2021 is posting but i have license for 2019. Thanks!
learn.microsoft.com
Anybody tried running "F" cpu inside M720q?
I'll propably score another M720q for 80€, however it has G5400T ... it might be sufficient but I may rather find a 4-core CPU ... the cheapest I can find is obviously i3 9100F ... I run an RX 6400 in my first M720q so I may as well use the "F" cpu there ...
Will it work fine? I mean it propably should since there is a dGPU ... but I am asking just in case. Thanks!
I'll propably score another M720q for 80€, however it has G5400T ... it might be sufficient but I may rather find a 4-core CPU ... the cheapest I can find is obviously i3 9100F ... I run an RX 6400 in my first M720q so I may as well use the "F" cpu there ...
Will it work fine? I mean it propably should since there is a dGPU ... but I am asking just in case. Thanks!
Hmm if it came from Lenovo with W10 IoT installed you should be able to create a USB key installer from the Lenovo product page.Yep, says it has " Windows 10 IoT Enterprise 64 ". Googling .... says I need to have an IOT account just to DL the IOT ISO ....
Anyone have experience with this? Does the IOT license on my device then NOT work with regular windows 10?
Where i can download Windows 10 IoT Enterprise LTSC 2019 - Microsoft Q&A
Hello, where i can find .iso file of Windows 10 IoT Enterprise LTSC 2019 on web page? Only newest version 2021 is posting but i have license for 2019. Thanks!learn.microsoft.com
What is the part number for your Lenovo?
Would this card fit in m90q (p360)
And this one could fit in m720q/920q
smallformfactor.net
And this one could fit in m720q/920q
GPU - Look at what I have (Low Profile 3050 8GB DDR6)
Found a vendor in China that is making Low Profile 3050 with 8GB of DDR6. These are the mobile variant so it's only 64 TMUs and 32 ROPs. No external power adapter required and only a single slot so great for those P360 Tiny builds. This will replace the T400 in my Lenovo P360 Ultra.
smallformfactor.net
Last edited:
Hi, i'm trying to control the fan on my P350 running Proxmox 8. Can anyone point me in the right direction?
So far this is the info i've got:
P350 Super I/O: Nuvoton NCT6692D
So far this is the info i've got:
P350 Super I/O: Nuvoton NCT6692D
Bash:
$ sensors-detect
Intel digital thermal sensor... Success!
(driver coretemp)
Trying family National Semiconductor/ITE... Yes
Found unknown chip with ID 0x0111
Found unknown SMBus adapter 8086:43a3 at 0000:00:1f.4.
Sorry, no supported PCI bus adapters found.
$ superiotool -d -e
superiotool r
Found Aspeed AST2400 (id=0x00) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
val 01 11 00 11 01 20 00 09 00 10 01 02 00 00 00 c2
def 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LDN 0x02 (SUART1)
idx 30 60 61 70 71 f0
val 00 00 00 00 03 00
def 00 03 f8 04 02 RR
LDN 0x03 (SUART2)
idx 30 60 61 70 71 f0
val 00 00 00 00 03 00
def 00 02 f8 03 02 00
LDN 0x04 (SWC)
idx 30 60 61 62 63 64 65 66 67 70 71
val 01 0a 00 ff ff ff ff ff ff 00 03
def 00 08 e6 08 e0 08 e4 08 e8 09 01
LDN 0x05 (Keyboard config (KBC))
idx 30 60 61 62 63 70 71 72 73 f0
val 00 00 00 00 00 00 03 00 03 83
def 00 00 60 00 64 01 02 0c 02 83
LDN 0x07 (GPIO)
idx 30 38 70 71
val ff ff ff ff
def 00 00 0b 01
LDN 0x0b (SUART3)
idx 30 60 61 70 71 f0
val ff ff ff ff ff ff
def 00 03 e8 06 02 00
LDN 0x0c (SUART4)
idx 30 60 61 70 71 f0
val ff ff ff ff ff ff
def 00 02 e8 05 02 00
LDN 0x0d (iLPC2AHB)
idx 30 70 71 f0 f1 f2 f3 f4 f5 f6 f7 f8 fe
val 20 ff ff ff ff ff ff ff ff ff ff ff ff
def 00 09 01 NA NA NA NA NA NA NA NA 00 00
LDN 0x0e (Mailbox)
idx 30 60 61 70 71
val ff ff ff ff ff
def 00 08 c0 09 01
Last edited:
All - Has anyone have any experience with the following with updating network/m.2 wifi/bluetooth cards.
Putting a AX210NGW or AX211NGW in a m920qq or m715q gen2?
I already have the m920q, and came across a deal for the m715q gen2 (for cheap). The m715q gen2 needs antenna, so was wondering since already need order some parts for it.
Putting a AX210NGW or AX211NGW in a m920qq or m715q gen2?
I already have the m920q, and came across a deal for the m715q gen2 (for cheap). The m715q gen2 needs antenna, so was wondering since already need order some parts for it.
Last edited:
you want AX200 or AX210 for wifi 6/6E ... AX201 and AX211 are PCNVio2 cards that require 10th gen or newer Intel
Correct, later Tinys come with three SKUs for the motherboard - no Windows license, Windows IoT, or Windows Pro. It's in the first post, but maybe not sufficiently emphasised?Yep, says it has " Windows 10 IoT Enterprise 64 ". Googling .... says I need to have an IOT account just to DL the IOT ISO ....
Anyone have experience with this? Does the IOT license on my device then NOT work with regular windows 10?
Where i can download Windows 10 IoT Enterprise LTSC 2019 - Microsoft Q&A
Hello, where i can find .iso file of Windows 10 IoT Enterprise LTSC 2019 on web page? Only newest version 2021 is posting but i have license for 2019. Thanks!learn.microsoft.com
Thanks @Parallax ! I did see something about that under the upgrade M90q not the 920. I have the older 920, so would have guessed win pro. The bigger issue was I didn't know the restriction around win IOT, that I needed an account just to DL win IOT, I figured you just created a windows usb like normal, then the install windows would read the IOT off the motherboard and activate win iot. I didn't realize you needed different install medium from winIOT than win pro, so, all my bad.
IoT downloads are included in my Visual Studio Enterprise subscription. Let me know privately if you still need an ISO and I can share a link.
Would this card fit in m90q (p360)
View attachment 32202
And this one could fit in m720q/920q
View attachment 32203
GPU - Look at what I have (Low Profile 3050 8GB DDR6)
Found a vendor in China that is making Low Profile 3050 with 8GB of DDR6. These are the mobile variant so it's only 64 TMUs and 32 ROPs. No external power adapter required and only a single slot so great for those P360 Tiny builds. This will replace the T400 in my Lenovo P360 Ultra.
Lenngth and height defintely work out, length is slightly less tall then the XFXF speedster RX 6400 i got in my p350 TINY, just that thickness is liek 3mm more, since I have no access to my p350 as I have at at work, It may end up not fitting heightwise with the cover on.
Hello,
I'm facing a very strange problem with one M920q that's part of a 3-node Proxmox cluster. The physical hardware of the 3 nodes is as follows:
The issue I'm having is with Node 2 in the above setup. I'm trying to upgrade the cluster from Proxmox 7 to Proxmox 8 and started with Node 3. Upgrading Node 3 completed successfully, but when I was trying to upgrade Node 2 it abruptly shut down about mid-way through the upgrade resulting in a broken OS.
I reinstalled & reconfigured Proxmox 7 on this node and tried the upgrade again, with the exact same result. I've now tried the following approaches:
Given that the only difference between Node 2 and Node 3 is the NVMe disk, I did search online for any reports of issues with this drive and the 6.2 kernel but did not find anything.
Does anyone have any suggestions on what I can try next?
I'm facing a very strange problem with one M920q that's part of a 3-node Proxmox cluster. The physical hardware of the 3 nodes is as follows:
| Node 1 | Node 2 | Node 3 |
|---|---|---|
| CPU: i5-8500T RAM: 64 GB RAM (2x32 GB 2666Mhz Micron) Storage: Samsung PM981a 250GB NVMe Extra Network: AOC-STGN-i2S | CPU: i5-8600T RAM: 64 GB RAM (2x32 GB 2666Mhz Micron) Storage: Samsung 980 250GB NVMe Extra Network: AOC-STGN-i2S | CPU: i5-8600T RAM: 64 GB RAM (2x32 GB 2666Mhz Micron) Storage: Samsung PM981a 250GB NVMe Extra Network: AOC-STGN-i2S |
The issue I'm having is with Node 2 in the above setup. I'm trying to upgrade the cluster from Proxmox 7 to Proxmox 8 and started with Node 3. Upgrading Node 3 completed successfully, but when I was trying to upgrade Node 2 it abruptly shut down about mid-way through the upgrade resulting in a broken OS.
I reinstalled & reconfigured Proxmox 7 on this node and tried the upgrade again, with the exact same result. I've now tried the following approaches:
- Install Debian 12 and then Proxmox 8 over PXE Boot (netboot.xyz)
- Result: Machine shuts off when installing kernel package
- Install Proxmox 8 from ISO (Ventoy disk)
- Result: Machine shuts off when installing pve-firmware package
- Install Proxmox 8 directly from PXE Boot (netboot.xyz)
- Result: Machine shuts off (Could not see which package was being installed)
- Install Debian 11 and then Proxmox 7 over PXE boot (netboot.xyz)
- Result: Machine boots up normally with the Proxmox OS.
- Install opt-in 6.2 Kernel for Proxmox 7
- Result: Kernel install succeeds but any attempt to boot with the 6.2 kernel causes the machine to shut down early in the boot process. Could not find any messages in the logs.
Given that the only difference between Node 2 and Node 3 is the NVMe disk, I did search online for any reports of issues with this drive and the 6.2 kernel but did not find anything.
Does anyone have any suggestions on what I can try next?
Last edited:
It's not a very exciting suggestion, but you could try clearing/resetting the BIOS. Next step would be swapping the drive, given 250GB NVMe drives are basically being given away free in cereal packets nowadays. Also check your PCIe card and riser are properly seated. Run a RAM check.
My external 3.5" USB HDD started malfunctioning and I hope it's the enclosure at fault, so I need to test the drive by connecting it directly. I have a PCIe SATA card but need 5V and 12V to connect the power to the drive. Is there any reliable source of 12v inside the cage I can use?
I don't have any other PC handy at the moment so need to get by with using my p340 tiny for that.
I don't have any other PC handy at the moment so need to get by with using my p340 tiny for that.