Printed an ITX case for a nuc like ITX project. Yes it is bigger... 7.5"x7.5"x2.5"
But it packs a full B450 itx board (2x hdmi, 1 DP) 200GE, 512GB NVME and 16GB ram.
Nice little linux box. ( I still need to print the lid and back plate.)
It started right up, didn't detect nvme. Now won't even spin the fans with that 80w pico.
2-3 boots max. The pico psu is good, powers up other atom and am1 itx boards just fine.
But this Aurus B450 doesn't like it. I currently have it running off an old 650w seasonic ATX happily...and the psu is bigger than the case.
I need pico power suggestions OR, somewhere to buy an HDplex 160w.
But it packs a full B450 itx board (2x hdmi, 1 DP) 200GE, 512GB NVME and 16GB ram.
Nice little linux box. ( I still need to print the lid and back plate.)
It started right up, didn't detect nvme. Now won't even spin the fans with that 80w pico.
2-3 boots max. The pico psu is good, powers up other atom and am1 itx boards just fine.
But this Aurus B450 doesn't like it. I currently have it running off an old 650w seasonic ATX happily...and the psu is bigger than the case.
I need pico power suggestions OR, somewhere to buy an HDplex 160w.