I recently threw some cheap SAS drives and HD's into a single E5 V1 box with 16GB RAM and a Mellanox ConnectX-2 EN. I want to use it as an iSCSI backup target for my Proxmox VE servers. I'm using the special NAS4Free build w/ the Mellanox drivers. I know FreeNAS 10 will have Mellanox support. Seems to work OK but I'm not really thrilled with the lack of upgrade options.
Here's what I'm having issues with. I go to NAS4Free and I make an iSCSI target.
Everything looks OK but then...
And nothing. I verified on the NAS4Free box that it is setup on that 10.0.1.17 IP address.
What am I missing?
I would swap now to FreeNAS but 10 seems too far off for this project yet that is the one with Mellanox support.
I would not mind doing napp-it at this point of it'd work.
Here's what I'm having issues with. I go to NAS4Free and I make an iSCSI target.
- Initiator setup for all networks
- Portal Group I have portals for 0.0.0.0 and the internal subnet
- Extent0 is setup on the /mnt/bupool/extent0 and setup to 3TiB
- Target is setup
Everything looks OK but then...
- I go to the Proxmox VE UI and there are no LUNs showing up.
- I go to the Proxmox VE CLI and do:
Code:
[/LIST]
pvesm iscsiscan --portal 10.0.1.17
What am I missing?
I would swap now to FreeNAS but 10 seems too far off for this project yet that is the one with Mellanox support.
I would not mind doing napp-it at this point of it'd work.