Does anyone have a working configuration for boot the windows 10 installer over ipxe. I have tried
(I can get to the installer this way but fails at looking for drivers)
initrd bootmgr bootmgr
initrd boot/bcd BCD
initrd boot/boot.sdi boot.sdi
initrd sources/boot.wim boot.wim
chain wimboot || goto failed
goto start
Also via memdisk load (Fails at iso load with message No Space Left on Device.)
initrd http://192.168.1.10/win10ent.iso
chain http://192.168.1.10/memdisk iso raw || goto failed
All of this is done in a vm in Hyper-V with 10gb of ram so enough ram to load iso.
(I can get to the installer this way but fails at looking for drivers)
initrd bootmgr bootmgr
initrd boot/bcd BCD
initrd boot/boot.sdi boot.sdi
initrd sources/boot.wim boot.wim
chain wimboot || goto failed
goto start
Also via memdisk load (Fails at iso load with message No Space Left on Device.)
initrd http://192.168.1.10/win10ent.iso
chain http://192.168.1.10/memdisk iso raw || goto failed
All of this is done in a vm in Hyper-V with 10gb of ram so enough ram to load iso.