I've been trying to get OPNSense running on my Dell Wyse Zx0 (7010) and I have been completely unable to get the Mini PCI-e i210AT NIC working in the setup. Not sure if the NIC is a dud, if it's just incompatible with the Zx0, if the Mini PCI-e slot is broken on the Zx0 or some other reason.
I've tried taping off pins 30 and 32 as per another STH forum post but that didn't end up working either. The BIOS doesn't show any evidence of the NIC either. I don't have another computer with a Mini PCI-e port to test if the ethernet card works and also don't have another Mini PCI-e device to check if the Zx0 is working properly.
Any ideas what the problem could be or any other troubleshooting strategies?
NIC: https://www.aliexpress.com/item/1005006048721169.html
I've tried taping off pins 30 and 32 as per another STH forum post but that didn't end up working either. The BIOS doesn't show any evidence of the NIC either. I don't have another computer with a Mini PCI-e port to test if the ethernet card works and also don't have another Mini PCI-e device to check if the Zx0 is working properly.
Any ideas what the problem could be or any other troubleshooting strategies?
NIC: https://www.aliexpress.com/item/1005006048721169.html